POLL: berg cup wheels which ones?

[Whubbsie]

This is stupid low, and after this pic was taken I lowered it another 5mm.

You know what I still look at that and think it's still not low enough

[Preen59]

Ronals dude. Ronals.

[jayjay]

are you going to slam it on custom archwork? if you got some SPT going, the bbs would be fine as as, but i have a feeling 9-10s on the rear would be where you wanna be heading.

ronals look better

[WABIT]

the fronts are the lowest i can go, with the 15x8's on the front they dont scrub as it has no travel, so a smaller wheel wont rub either, the backs are all the way down too, if i get the 9's on the back ill take the helper springs out aswell and that will drop it another 2" closer to the 13's

dom

[DubSteve]

You know what I still look at that and think it's still not low enough

Stick 1 1/2 fingers together look at your sump and imagine my car

the fronts are the lowest i can go, with the 15x8's on the front they dont scrub as it has no travel, so a smaller wheel wont rub either, the backs are all the way down too, if i get the 9's on the back ill take the helper springs out aswell and that will drop it another 2" closer to the 13's

dom

You can't slam 13s dude even with the helper springs out I sit half way on front and back and I scrape the backs only.

By slamming I mean the coils not the actual car lol.

[WABIT]

yeah but if it comes down to it, ill modify the struts to have a shorter stroke and overall length, notch the body arms for drive shaft clearance and a tie rod flip kit and ball joint extenders

dom

[Preen59]

yeah but if it comes down to it, ill modify the struts to have a shorter stroke and overall length, notch the body arms for drive shaft clearance and a tie rod flip kit and ball joint extenders

dom

Oh.... And a dry sump...

[evorobin]

Oh.... And a dry sump...

HOLLA

[DubSteve]

yeah but if it comes down to it, ill modify the struts to have a shorter stroke and overall length, notch the body arms for drive shaft clearance and a tie rod flip kit and ball joint extenders

dom

No thats not what I mean you physically can't go lower, especially with the cab cause of the sills but your C arms will be scraping everywhere!

[WABIT]

dude, its been done plenty of times, there are cars heaps lower than both of ours, i guess theirs only 1 way to find out i guess...

dom