H&R Sports Springs

[Suffolk]

Finally received my H&R Sport Springs!
Now I'm not sure if they would fit due to clearance. 5X112 19X8.5 et45

Springs lower approx 35mm on the front, 33mm back.

Do you think i will have any issues??

[team_v]

Shouldn't have any issues with the fender lining, i don't think the springs are any wider than the standard springs.

[Suffolk]

Thanks team_v, thats what I'm afraid of.
Rims are Omanyt Reps, same as you had previously had.

[Suffolk]

Maybe some spacers to push the rims more out??

[team_v]

I would see if you can measure the current springs and the new ones and see if there is any point where it sticks out more.

The springs won't put the wheel up into the arch so the only worry is if they will scrub on something by being a bit lower.
Best bet is to get under the car and have a look with a measuring tape etc.

Otherwise take it to your local suspension shop and see if they can get itfitted and see if it hits.


Also check out vortex as there is a lot of fourm members who have lowered Tiguans.







I would definitly not go the spacer route.

[Suffolk]

thank-you team_v, I'm off to get it checked out.