3 piece wheel screws!!

[byza]

They should look pretty nice fitted up, what offsets? You running adapters or wobble bolts to fit those?

offset is +45ET so not to agressive and will be running wobble bolts... was thinking about redrilling but might be easier to sell later if i leave the 5x114.3... wanted slighty more agreesive fitment but that can be done with widening them...

[byza]

just get them gold plated, would be cheaper than new bolts

dom

that isnt such a bad idea actually... ill need to relook at the heads again and see if they are in good enough condition to it... right now the cheapest quote for 160 gold bolts is about $450 plus shipping... surely should be able to get them plated again cheaper...

i just need to find some local electroplaters i guess..

[Mr. JLT]

Give these guys a try
Pine River Electroplating PTD LTD
3/23 Paisley Drive
Lawton, QLD 4501 07-3883-2018

Im gona have them do a set of lips for me.. I have seen a few of there products up here on hot rods. Looks good

[byza]

Give these guys a try
Pine River Electroplating PTD LTD
3/23 Paisley Drive
Lawton, QLD 4501 07-3883-2018

Im gona have them to a set of lips for me.. I have seen a few of there products up here on hot rods. Looks good

thanks mate... i have rang quite few places around south east QLD and its not worth getting the bolts replated.. 3 quotes and they were all around $1.50-$3.00 per bolts for gold heads... i can get new bolts with holding nut for US$1.50 each so this might be better than refinishing and keeping the others as backups...

hopefully my wheels go in the week and should be done within 5 days... then will just need to sort out the bolts but waiting on email back they might not ship from the US to Australia...