2013 rear camber angle 2013 polo gti

[Viking1728]

Hi, doing a wheel rotation today and notice one wheel not sitting square once off the car. The wheel was on LHS Rear. Using a simple 2 foot square it is laying in at the top by about 20 mm, the other side is about 5 mm. There doesnt appear to be a way of adjusting this camber, is this correct?. And is it possible to do alignment adjustments on the rear axle on these cars, by a proper wheel alignment shop i might add. I was just using the square as a reference. Thanks for any info.

[Hillbilly]

Hi, doing a wheel rotation today and notice one wheel not sitting square once off the car. The wheel was on LHS Rear. Using a simple 2 foot square it is laying in at the top by about 20 mm, the other side is about 5 mm. There doesnt appear to be a way of adjusting this camber, is this correct?. And is it possible to do alignment adjustments on the rear axle on these cars, by a proper wheel alignment shop i might add. I was just using the square as a reference. Thanks for any info.

Could be just the way it was hanging on the strut and no you cant do an alignment on the rear of a POLO There is a thread about it in the Polo Forum