UK car- GTI Engineering Golf Syncro

[re2]

well after 5-6 years of hunting I finally have a set of the G60 Syncro wing badges! Chris ha=s looked and a few other friend have tried but it all came down to Ebay in the end



I bought one as thats all was available- just to get the part number or make a copy, and then 2 days later a pair are up for sale. It didnt take much thinking before the button was pressed!



Heres the gearnob I made using a scanned 20 yr old sticker i found in one of my brochures. Im not sure wether to use this or the Mk4 one shown earlier

well after years and years of searching i finally have the wing badges fitted today and they look f'ing top!

however......
I then get told that the guy I bought these off has the early pre '87 badges too! Now i never even knew these existed, so temptation struck and Ive spent more $ on badges!



This has a chrome surround and also has an etched background like the
dash badge below



Im going for the pre '87 look anyway as I have a grill badge like this but
with a chrome surround grill



Here are the rest of the badges to match with a GTI Engineering badge too
(took me ages to find this and then a box load have been sold on Ebay!) The
Golf badge was also hard to find new. I plan to fit the Golf and Syncro badge
as they are suppossed to be on the right side, and as I have a later rear end
with the VW roundal in the middle, Im going to fit the GTI Engineering badge
where the Volkswagen badge would have been on the early rear end.



As you can see there is differnces with the script of the Golf G60 Syncro badge
that dont match up with the old fashioned script (2 scripts were used on the
Mk2 Golf Syncro)



but I just dont know if the chrome surround badge will stick out from the
paintwork more than I wanyt it to. Ill find out soon, but I do rather like the
old fashioned badges!

Heres some better wheel pics too

[re2]

ive been playing today and fitted a couple of the wheels- only a couple you say! What a lazy git! Well, its been a mixed bag today. Firstly the wheels look soooooooooooo bloomin good, but the front wheels catch the brake caliper [B)]









I need to buy some slimline calipers to make the clearance. I cant put spacers on as the wheels are ET28 and already dangerously close to my standard arch's. Im aso going to have a think about tyre sizes later too. Im using 195/50/15 as thats what I already had from previous alloys. Although Im thinking about 185/45/15.

I also added the badges to the rear of the car.

[re2]

I received the earlier syncro wing badges today and as soon as I opened the box, I knew they were larger than the G60 ones! I really ddidnt know what to do. I put one on the car and walked from side to side, but I was still unsure. So I went and had a cup of tea



When I came back, I realised that they werent really out of scale, so Ive kept them. Got some 5mm spacers so Ill get those on as soon as Ive bought a new trolley jack. Its a bugger to get wheels on when gravity and a leaky valve are doing their best to thwart you [!]

[re2]

Heres a couple of pics Ive found

Facet red-top fuel pump mounted to the rear arch skin



Filterking fuel regulator. I chose this glass one for the retro look and I also managed to get a mini VDO fuel pressure guage



This is the remodelled dash surround i made a many years ago and then got it covered in leather. Ive relocated the Syncro badge that was originally placed on the glovebox

[re2]

ive been busy scanning stuff, so here goes.......

[re2]

[re2]

heres a few article about the original GTI Engineering Golf Syncro

[re2]

[re2]

ok i promise that I wont post anymore old pics and my next post will be pics of the car currently and i will have fitted a few more things

[re2]

Well, Ive been busy in the loft more than on the car, and its amazing what you loose when you squirrel things away.

The rear screen isnt fitted properly at all and is only resting there. I tried to show the tint, but it just wouldnt work