Back all the mounts off but leave the bolts in and try to shake the engine.
What I did in the vr when it wasn't sitting 100%
Printable View
Back all the mounts off but leave the bolts in and try to shake the engine.
What I did in the vr when it wasn't sitting 100%
Yeah that's what I did but it still didn't want to move very far. Oh well, new mounts do feel great except when idling, then everything shakes haha.Quote:
Originally Posted by dylan8
Not much to update... Taken it down the coast a few times, and did a run up my nebo last weekend, had run faultlessly :D also got a gfb diverter valve as my eBay special was leaking above 15psi :( also re-arranged the pipes a bit to hide the dv under the charge piping more a beater look. Pics for clicks...
http://www.vwwatercooled.com.au/foru..._zpsttuw-1.jpg
http://www.vwwatercooled.com.au/foru..._zpswybw-1.jpg
Tight fit but nothing rubs :)
http://www.vwwatercooled.com.au/foru..._zpsgovd-1.jpg
Wheel and tyre specs?
It's all on the first page bro but they are 18x8.5 et30 all round. Tires are 225-40-18Quote:
Originally Posted by staticmk4
Can't believe I missed that lol. But it looks nice manQuote:
Originally Posted by Lito
Sooo been a while between updates. Not much has been going on, she had been running sweet. Getting a bit sick of looking at my bumper not fitting right so I have decided to ditch the pwr core and buy the cts fmic kit, the core is about 20mm thinner so should fit a lot better and the pipes do look pretty.
http://www.vwwatercooled.com.au/foru..._zpsitka-1.jpg
Also had some spare time yesterday so I decided remove the afe intake and fit something a bit smaller. Found a pod sheild at autobahn that fit perfectly over my 3" k&n, just had to make space for the icm
http://www.vwwatercooled.com.au/foru..._zpsvc2l-1.jpg
http://www.vwwatercooled.com.au/foru..._zpszoff-1.jpg
Went to bunnings to get a bracket haha
http://www.vwwatercooled.com.au/foru..._zps1vek-1.jpg
And installed
http://www.vwwatercooled.com.au/foru..._zpsquky-1.jpg
How much was the fmic?
It's $699 usd on the cts website. I have to go through an aus distributed though, not sure how much yet, still in the email stage :(Quote:
Originally Posted by staticmk4
done a few little things while I'm on holidays. Painted the 034 engine cover wrinkle black and re-wrapped the to part of the downpipe..
http://www.vwwatercooled.com.au/foru..._zpstudz-1.jpg
And today I did an oil and filter change, check the oil pump pickup while I was down there, all looked sweet..
http://www.vwwatercooled.com.au/foru..._zpshnjs-1.jpg
http://www.vwwatercooled.com.au/foru..._zpszjqd-1.jpg