Dougi's Polo 1.9 TDI OEM+

[Dougi]

Hey all

This is my Polo TDi currently with mods

Engine
Mods to be Done
Motor is stock
PD160 intake
De-Catt
Muflorectomy

Suspension and Wheels

VeemaX Coillover
Polly LCA buches
Ferodo DS Disks

Other Mods Done

Polo Cup front Bumper
New South Performance boost Gauge
Sony Explode 10” 1200w Sub
2300w ICE Amp

Mods to be Done

Software
Front mount Intercooler
Water Meth
17” Wheels and BBs 16” wheels
15mm Spacers
Leather seats
Polo GTi Side Skirts
Engine mounts to replace
Roof lining to recover
Plastic A B C pillars to wash or Spray Black
Front and Rear Strut bars
More to follow

When i collected the car:



The polo is very much stock but has some small mods here and there:

Polo 2007
1.9TDI
Vmaxx coilovers
Solid polly bushes (Dam it rides hard)
Exhaust back box is out, straight pipe through
I has had the catt removed.
Polo GTI head lights
Polo GTI grill
Fogs lamnex yellow
EBC brake pads.

This is what she looked like when i took delivery


I did my first mode the following day offer I received the car,
And I blacked out the badged. Just looks better.
There will be more mods but just not right now.

And some pics to follow:

[Dougi]

Then i fitted Cupra lip




Then i got myself a Cup ED front bumper

I have some more pics from the cellphone.








Ok fine, you can see.....

went to builders and just a can of red plasti dip as i just wanted to see want this would look like:
what you think?

Cleaned and read.
was the first pic with my Toes!!!!

First Coat


Second:


Fourth:


Done:


Back on the car:

[Dougi]

So I went to Goldwagen on sat and thank to Wikis I got me a set of DS disks, and some new HnR rubber mount for the rear springs

Before

After

[Dougi]

Hey,
took some photos with some friends

[Dougi]

Hey all,

So a small update.
So Sunday I decided to work on the polo and give her some loving.
I fitted a strut brace and the metal boost pipe witch you can see:

Strut Brace





Boost Pipe





And I gave the car a was with some Meguiar's
Then X swerl
Then Polish
And the some Wax.
Car now has that nice wet look.
See:

Motor





Car






Oh and i cut the tail piece off and look much better, will have to take a pic later and post.

[Dougi]

and now this is what she looks like
after getting some new wheels BBS CX-R's
Pics from Saturday

[Dougi]

I did the EGR delete with the plates made by BIGMIG (Thank you very much)
Then did EGR delete
Replaced tie rod ends
Replaced ball joints
Replaced brake pads

EGR Delete



Then on sat morning I had to get a new steering rack boot as I noticed that is was ****ed and got it fitted at Tiger wheel.

Car parked at Tiger


Then on Saturday afternoon. Been late I had issues with a boost pipe always popping off so got the car hope after a lot of swearing and and and.
Sunday with some yet again help form Tiaan ( Thanks Dude) we found a new silicone pipe and did this

[Smead]

That's 1 sweet polo mate. Looks awesome

[Dougi]

Thanks bud.