Support VWWC

Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Starting issue. 2012 Tiguan

  1. #11
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,523
    Users Country Flag

    Brake lights don't get full battery voltage anyway, as they're illuminated via a PWM signal. i.e. the BCM only sends enough voltage to sufficiently illuminate them.
    '07 Transporter 1.9 TDI
    '01 Beetle 2.0

  2. #12
    Join Date
    Feb 2014
    Location
    Central Vic
    Posts
    539
    Users Country Flag
    Quote Originally Posted by Umai Naa!! View Post
    Brake lights don't get full battery voltage anyway, as they're illuminated via a PWM signal. i.e. the BCM only sends enough voltage to sufficiently illuminate them.
    Interesting, thanks
    I'm so protective of the battery in the latest vehicles I don't even have interior lights in the 'armed' mode.
    My 308's radio won't go long without the engine running either.
    It seems to me the under bonnet space needs to prioritise a larger battery (higher capacity) these days.......or go the expensive BMW route.

  3. #13
    Join Date
    Mar 2017
    Location
    Tasmania
    Posts
    617
    Users Country Flag
    Starter motor won't engage until the control unit tells it that the glow plugs have reached temp. Takes longer the colder the vehicle is.
    Cheers

  4. #14
    Join Date
    Aug 2012
    Location
    Perth WA
    Posts
    264
    Users Country Flag
    Quote Originally Posted by doc_777 View Post
    Starter motor won't engage until the control unit tells it that the glow plugs have reached temp. Takes longer the colder the vehicle is.
    I have re read my post and can see the confusion.

    If I leave the ignition on without starting the car for 5-10 seconds to allow the glow plugs to reach working temps, the the engine starts first time without fuss. If try to start the car immediately, then there is a pause in the starting sequence.

    My bad. I hope that this clear as mud.

  5. #15
    Join Date
    Dec 2011
    Location
    Pacific Paradise QLD
    Posts
    7,359
    Users Country Flag
    Quote Originally Posted by Amalgam View Post
    I have re read my post and can see the confusion.

    If I leave the ignition on without starting the car for 5-10 seconds to allow the glow plugs to reach working temps, the the engine starts first time without fuss. If try to start the car immediately, then there is a pause in the starting sequence.

    My bad. I hope that this clear as mud.
    You have answered your own question about what to do then Havent you.

    Always has been wait for the glowplug light to go out before hitting the button. Even on my 1963 Farmall tractor.
    2021 Kamiq LE 110 , Moon White, BV cameras F & B
    Mamba Ebike to replace Tiguan

  6. #16
    Join Date
    Apr 2007
    Location
    Adelaide hills, SA
    Posts
    9,708
    Users Country Flag

    Quote Originally Posted by Hillbilly View Post
    You have answered your own question about what to do then Havent you.

    Always has been wait for the glowplug light to go out before hitting the button. Even on my 1963 Farmall tractor.
    The older diesels were more dependent on the glow plugs than a new CR diesels, and can start very fast in summer. But when the temperature gets closer to 0 deg. C, it's better to wait for the glow plugs light to go off.

    Any diesel from 1963 would struggle to start without the glow plugs working 100% at any temperature and would not start at sub zero without them.
    Last edited by Transporter; 23-06-2017 at 07:00 AM.

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |