My EGR is great. Won't effect my reliability like you diesel boys.
2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |
My EGR is great. Won't effect my reliability like you diesel boys.
*Disclaimer - Don't rely on me, seek your own professional advice. Audi R8 E-tron. 230kw 4500nm! (not a typo).
Economy at 100kph =5.5L
So after trawling this thread, things to do to kep the EGR from crapping itself?
1. Drive it hard, flt out, regularly
2. Ask VW to clean it at your next service
3. Use an additaive to possbily clean it out
4. Buy a Provent?
Buy a Provent. You need to minimise either the oil, or the exhaust. The mix makes sludge. Minimising exhaust WILL raise EGT's and may indeed cook your turbo, but apart from the Provent cost there's no downside to removing oil vapour.
2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |
2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |
All quiet on the TSI front suddenly...
For the record, anyone even CONSIDERING adding a draw through cleaning bottle like I did, you need to remember that a diesel starts it's ignition process with the addition of fuel, so whatever you add to the inlet can indeed become a secondary fuel, cause pre ignition, and possibly destroy your motor. Do NOT under any circumstances add diesel to your inlet, as this will then ignite in the cylinder before it's designed to, and that is bad, melt holes in your pistons bad.
I have noticed some light knocking on flat out acceleration with the metho mix, so it's obviously slightly pre igniting at WOT.
Be careful kiddies!
2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |
awww bloody chunder.....
Man ProVent description and function.
Very nice power point presentation explaining blow by gases and their effect on engine.
http://www.mediafire.com/file/gnjfwd...0_800__000.ppt
Performance Tunes from $850Wrecking RS OCTAVIA 2 Link
I've thought about the passive cleaner idea even more, and have decided ANYTHING, even specific diesel cleaner in the inlet is a bad idea. If you think about it, any fuel additive in a diesel isn't introduced until the fuel is, so there's nothing but air compressing. Adding an alternate fuel source, such as injector cleaner, metho, pretty much anything, gives the engine something to potentially combust before it's supposed to. It's why methanol and propane are used in diesels as they have such high octane ratings and won't go bang before the injected diesel. I guess running methanol through would be the answer there, but I wonder if it would move the sludge?
A long term water/methanol injection system might be a good thing, both for temps, and for the cleaning effect. Hmmmmmm......
I figure the only way is to remove the manifold from the engine, clean it out, and put it back together dry and clean. Bit of a major task!
2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |
Man Provent works for me on T5 and I'm going to plumb it in the Golf very soon, using copper tubes and straight pieces of silicon hose. There is nothing you can safely use for cleaning due to amount of the sludge there. You would have to shrink yourself and flow in with a brush, a bucket and a mop.
Last edited by Transporter; 27-04-2009 at 06:44 PM.
Performance Tunes from $850Wrecking RS OCTAVIA 2 Link
Bookmarks