Can anyone tell me if my wheel alignment for 2010 125TDI is in spec? Where do you find what that spec is?
Before:
Rear Camber left -0°36' right -1°31'
Rear Toe left +0.0mm right +0.3mm
Front Camber left -0°29' right -0°47'
Front Toe left -1.0mm right -0.9mm
After:
Rear Camber left -0°38' right -1°31'
Rear Toe left +0.8mm right +0.8mm
Front Camber left -0°40' right -0°39'
Front Toe left +0.6mm right +0.5mm
Reading about it some info suggest front wheel drives need negative toe yet this has been shifted to positive toe.
2010 Passat 125TDI Highline Wagon / ACC / Bi-xenon / Lane Assist
Bookmarks