Support VWWC

Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: R36 Running in

  1. #1
    Join Date
    Apr 2009
    Location
    Sydney
    Posts
    50

    R36 Running in

    I believe that correct running in procedure greatly effects the longterm characteristic of the engine, and future power output.
    My thoughts have always been, to avoid great load on engine, but the best way is on country roads with moderate and low revs, for long lengths of time. Better than stop start traffic conditions.
    What are your thoughts guys and have u all got different advise for different dealerships as to KMs and methods??
    2009 R36 Black Sedan.

  2. #2
    Join Date
    Apr 2009
    Location
    Melbourne, VIC
    Posts
    1,433
    Users Country Flag
    Varied revs is the most important thing and there's nothing wrong with the occasional higher revs either. Just my 2 cents.

  3. #3
    Join Date
    Jan 2009
    Location
    Pakenham
    Posts
    251
    Run that sucka hard.

    Check this article. A little long but an interesting read.

    http://www.mototuneusa.com/break_in_secrets.htm

    Modern engines don't need running in as such. It's all ready to rock n roll when you pick up the car. Tolerences are that tight nowadays that the old way of thinking no longer applies.
    Last edited by Autopia; 11-05-2009 at 11:14 PM.
    -------------------------------------


  4. #4
    Join Date
    Dec 2007
    Location
    Adelaide
    Posts
    16
    Drive it like you stole it. Find a road with some nice big hills. Put it under load up the hills, and make the engine work.

    You'll thank yourself after about 10,000km when it starts to loosen up and making good power.

  5. #5
    Join Date
    Jan 2009
    Location
    Pakenham
    Posts
    251
    Quote Originally Posted by ROGUE View Post
    Drive it like you stole it. Find a road with some nice big hills. Put it under load up the hills, and make the engine work.

    You'll thank yourself after about 10,000km when it starts to loosen up and making good power.
    Amen

    Everytime I see your avatar I laugh. Did you design it yourself?
    -------------------------------------


  6. #6
    Join Date
    Apr 2009
    Location
    Sydney
    Posts
    50
    Thread Starter
    hehe, thanks for your advice Autopia and Rogue..Sounds like fun, Ill probably wont be able to resist anyway.
    Interesting read, but not sure I trust it.
    2009 R36 Black Sedan.

  7. #7
    Join Date
    Jan 2009
    Location
    Pakenham
    Posts
    251
    Quote Originally Posted by SharifE View Post
    hehe, thanks for your advice Autopia and Rogue..Sounds like fun, Ill probably wont be able to resist anyway.
    Interesting read, but not sure I trust it.
    Yeah I know where you're coming from.

    Just have fun with the car. The days of mollycoddling a new engine passed years ago. If you'd just bought a 1964 Chev I'd say take it easy on her. But a 2009 VW engine? No need. It's good to go.....hard!
    -------------------------------------


  8. #8
    Join Date
    Apr 2009
    Location
    Melbourne, VIC
    Posts
    1,433
    Users Country Flag
    That is an interesting read... I know the engine oil from the factory is different to what's used regularly after the first service, but should we change the oil early on? I' coming up on 2,000km. Was going to wait until 7,500km.

  9. #9
    Join Date
    Apr 2009
    Location
    Sydney
    Posts
    50
    Thread Starter
    I understand where u coming from, Im not worried about engine ****ting itself.
    Just trying to get max output in long run. You see so many different cars same specs and dynos having different power. I think it comes down to running in motor, that would effect power output later. Its such a short period of time anyway, plenty of time to have fun.
    For example if running in procedure costs 2-5% of power output of engine, and someone is charging $2K for similar increases with chip..You want to get it right.
    2009 R36 Black Sedan.

  10. #10
    Join Date
    Jan 2009
    Location
    Pakenham
    Posts
    251

    Quote Originally Posted by Rocket36 View Post
    That is an interesting read... I know the engine oil from the factory is different to what's used regularly after the first service, but should we change the oil early on? I' coming up on 2,000km. Was going to wait until 7,500km.
    The "first oil change" debate is never ending and somewhat down to personal preference and experience.
    Mercedes Benz now state that their new cars don't need an oil change until their first service at 15,000km's.

    Personally I prefer to run a particular oil so I'm getting my mate to put my car on his hoist at 1500km's and drain the factory oil.

    Each to their own.
    -------------------------------------


Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |