Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: oil leak

  1. #11
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,979
    Users Country Flag

    It's a fair drip. Still need to take it somewhere and have it looked at. Could be split oil or something expensive. No way to tell from the photos.

    Gavin

  2. #12
    Join Date
    Feb 2011
    Location
    Newcastle
    Posts
    6,069
    Users Country Flag
    Rear main seal? Looks like its leaking from between the engine and gearbox.
    2017 Ford Fiesta ST the go kart

    2015 Audi SQ5 bi-turbo V6 TDI family hauler

  3. #13
    Join Date
    Jan 2013
    Location
    Brisbane, QLD.
    Posts
    511
    Users Country Flag
    Yep mate looks like rear main seal. If I were you I would ensure that there are NO leaks further uptop/anywhere else. Then you will need to remove the gearbox to inspect the rear main seal.

  4. #14
    Join Date
    Feb 2011
    Location
    Newcastle
    Posts
    6,069
    Users Country Flag

    oil leak

    Yep apparently the rear main seal is a pretty fragile/not great design and quite a common failure on the 2.0T engines.

    How The VW 2.0t TSI Rear Main Seal Fails - YouTube
    2017 Ford Fiesta ST the go kart

    2015 Audi SQ5 bi-turbo V6 TDI family hauler

  5. #15
    Join Date
    Mar 2009
    Location
    Adelaide
    Posts
    294
    Thread Starter
    Can I still drive the car though

  6. #16
    Join Date
    Jan 2013
    Location
    Brisbane, QLD.
    Posts
    511
    Users Country Flag
    Quote Originally Posted by passat08 View Post
    Can I still drive the car though
    Yes mate, just keep an eye on the oil level. Advisable to get this issue fixed ASAP though.

  7. #17
    Join Date
    Jan 2015
    Location
    Melb
    Posts
    157
    Users Country Flag
    Double post
    Last edited by Passat my07; 31-01-2015 at 10:11 AM. Reason: Double post

  8. #18
    Join Date
    Jan 2015
    Location
    Melb
    Posts
    157
    Users Country Flag

    Looks like rear main seal from those photos. Is there any oil above the bell housing? You also need to make sure the breathing system is working properly or the pressure in the crank case can push oil out of the seals. Also make sure the oil level isn't too high.

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |