Support VWWC

Results 1 to 5 of 5

Thread: Best Way to Wash

  1. #1
    Join Date
    Jun 2009
    Location
    Brisbane, QLD
    Posts
    382

    Best Way to Wash

    I am keen to hear from those that are particular about not getting swirl marks about there washing process. Up until now I have been using the Bowdens Own products Aus. These are the guys that own most of the historic touring cars of signifigance in the country. I have used this for the last 5 years on my Red Monaro that is about to be traded

    http://www.bowdensown.com.au/premium-car-care

    I am really keen on keeping the New R36 (when it arrives) in the best condition as possible.

  2. #2
    Join Date
    Apr 2009
    Location
    Melbourne, VIC
    Posts
    1,433
    Users Country Flag
    As far as washing goes, a microfibre wash mit is the best way to go.
    http://www.carcareproducts.com.au/pr...i_purpose_mitt

    Coupled with PH neutral Dodo Juice Born To Be Mild car wash.
    http://www.carcareproducts.com.au/pr..._shampoo/500ml

    To dry it off, forget anything but a waffle weave microfibre drying towel.
    http://www.carcareproducts.com.au/pr..._weave_x_large

  3. #3
    Join Date
    May 2009
    Location
    Q
    Posts
    130
    Quote Originally Posted by apom View Post
    I am keen to hear from those that are particular about not getting swirl marks about there washing process.
    Get two buckets and two mits (I use sheepwool versions).

    Put your car wash (I use Zano) in each bucket and the required water.

    Spray down the car to get rid of obvious dirt particles etc.

    Soak both your mits and then work with one lightly on a panel taking care not to rub too hard. Grit is your enemy.

    Put the used mit in the bucket and allow to soak/float freeing it of large particles. Get your second mit and do the same; alternating between the two mits and working lightly.

    After the first round of light and hopefully quick work, wash out your mits getting all particles out and repeat (if you think its needed).

    Dry the car with microfibre towel - don't bother with small ones. You need a large towel to do it efficiently.

    Apply your favorite finish/wax. I use the Zano system. Others can be just as good. The one thing in favour of Zano I've found is that during the strict water restrictions I still got beading of water on my car 18 months after an application of 3 coats of Zano. Amazing stuff.

  4. #4
    Join Date
    Apr 2009
    Location
    Melbourne, VIC
    Posts
    1,433
    Users Country Flag
    I forgot to mention the two bucket system....

  5. #5
    Join Date
    May 2008
    Location
    Erskineville, NSW
    Posts
    7,591
    Users Country Flag

    Go to this threadscroll down to the post by DMS Dan (commercial detailer). Everything you need to know.

    Duragloss comes highly recommended from a mate who has tried a few dozen brands.

    edit: 2 bucket system is generally one bucket of clean suds & one bucket of rinse water.
    carandimage The place where Off-Topic is On-Topic
    I used to think I was anal-retentive until I started getting involved in car forums

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |