Results 1 to 6 of 6

Thread: Seats - Front - Fits almost any VW vehicle - Octavia Golf Caddy Roomster Polo

  1. #1
    Join Date
    May 2008
    Location
    Erskineville, NSW
    Posts
    7,591
    Users Country Flag

    Seats - Front - Fits almost any VW vehicle - Octavia Golf Caddy Roomster Polo

    A pair of front seats out of my 2007 Skoda Octavia.

    Elegance spec. Fabric colour is Onyx (like a really dark grey).

    Adjustable for height, backrest angle, lumbar support, headrest goes up/down and front/back.

    Handy storage pocket built in.

    The bolstering is quite good, especially in the backrest.

    There is a map pocket in the rear of the seat back.

    Has side airbags. The connectors have been cut off but there are some Audi connectors supplied. Otherwise cut off your old connectors & re-solder or hardwire them in.

    The fabric on the drivers has some wear due to the stupid velcro on my work pants.

    Changing because I bought some leather seats and don't wish to store these.

    $130. (the airbags are worth more than that). Open to offers.

    P/U from Hurstville or Campbelltown or elsewhere (mutually agreeable).



    Last edited by brad; 09-07-2015 at 09:14 AM.
    carandimage The place where Off-Topic is On-Topic
    I used to think I was anal-retentive until I started getting involved in car forums

  2. #2
    Join Date
    May 2008
    Location
    Erskineville, NSW
    Posts
    7,591
    Users Country Flag Thread Starter
    Bump

    price reduction

    $160
    carandimage The place where Off-Topic is On-Topic
    I used to think I was anal-retentive until I started getting involved in car forums

  3. #3
    Join Date
    May 2008
    Location
    Erskineville, NSW
    Posts
    7,591
    Users Country Flag Thread Starter
    bump

    price reduction

    $130 or make an offer
    carandimage The place where Off-Topic is On-Topic
    I used to think I was anal-retentive until I started getting involved in car forums

  4. #4
    Join Date
    Jul 2015
    Location
    New South Wales
    Posts
    7
    Users Country Flag
    These fit in a MK3 Golf?

  5. #5
    Join Date
    May 2008
    Location
    Erskineville, NSW
    Posts
    7,591
    Users Country Flag Thread Starter
    I don't know but the mounting holes are:

    front-back 365mm (and you could re-drill to a certain extent)

    side-side 480mm

    I hope that helps you make a decision
    carandimage The place where Off-Topic is On-Topic
    I used to think I was anal-retentive until I started getting involved in car forums

  6. #6
    Join Date
    May 2008
    Location
    Erskineville, NSW
    Posts
    7,591
    Users Country Flag Thread Starter

    Bumpity
    carandimage The place where Off-Topic is On-Topic
    I used to think I was anal-retentive until I started getting involved in car forums

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |