Pm sent
Hi All,
Wrecked my MKIV GTI and I'm not getting another one so I've got plenty of bits that I've purchased over the years for sale. I'd rather not separate new and used and some of the bits may come in handy - so if anyone wants it for $100 total it's yours.
Weekend pickup only - located in SW Sydney (Campbelltown).
Please email me on DL3581@gmail.com as I don't come on here that often (too many heroes back in the day...)
Photos---> https://www.dropbox.com/sh/gv0spitj5...Upz1BeDHa?dl=0
If you need additional specific photos let me know.
NEW
Air Filters (Fits all MKIV Golfs and Jettas)
1 x OEM# 1J0129620 -> Mahle
https://www.ecstuning.com/ ES251921/
1 x OEM# 1J0129620A -> MANN Filter
https://www.ecstuning.com/ES2550960/
$15
Spark Plugs - (Fits all MKIV Golfs 1.8T only)
4 x NGK Spark Plugs (BKR7E)
$5
1 x Charcoal Lined Cabin Filter / Fresh Air Filter
OEM# 1J0819644A
https://www.ecstuning.com/ES1303001/
$10
Subframe Mounts (Fits all MKIV Golfs and Jettas except wagon)
2 x OEM # 1J0199429
https://www.ecstuning.com/ES10846/
$10
Upper Strut Perch (Fits all MKIV Golfs and Jettas)
2 x OEM# 1J0412341
https://www.ecstuning.com/ES2137089/
$5
Upper Strut Bearing (Fits all MKIV Golfs and Jettas)
2 x OEM# 1J0412249
https://www.ecstuning.com/ES518064/
$5
USED (or can't remember if used)
Neuspeed Pancake Pipe (Fits all MKIV 1.8T Golfs)
http://www.neuspeed.com/481085-lower...-pipe-18t.html
$50
Had it on the car but I thought it was rubbing against the wheels so I took it off.<br>
Control Arms with bushes (<500kms) - (Fits all MKIV Golfs and Jettas except wagon)
2 x OEM # 1J0407151C
https://www.ecstuning.com/ES260071/
$40 ono
I used to have a spare set to rotate and press new bushes in so it was an in and out job. I used to swap these out every 5000-7500kms. This set only had limited kms because I didn’t have time to press new ones and swapped them out the next weekend.
Tie Rod Assembly (Fits all MKIV Golfs and Jettas except wagon)
Left – OEM# 1J0422804B
Right – OEM# 1J0422804B
$10
Can’t remember using these to be honest – the Tie Rod ends look brand new, even though they’ve been in a box with parts from when I’ve ordered over the years.
Dogbone, Engine & Tranmission Mounts (Fits all MKIV Golfs)
$10
If anyone is looking to get polys inserted like the BFI Industries ones. I pulled these out because I replace with VF Engineering units. The gearbox mount are close to new because I wrecked the old ones and had that in temporarily.
Polyurethane Sway Bar Bush Kit (Opened – not used) (Fits all MKIV Golfs and Jettas except wagon with STANDARD swaybar)
https://www.ecstuning.com/ES2190254/
$5
Went to fit these and realised that my sway bar was custom.
Turbo Inlet Pipe
Front Shocks – Oettinger Spec (100 1005)
Make an offer or I’m binning this with the steering arms on Monday
Last edited by DIDZ; 24-07-2016 at 12:06 PM. Reason: Stupid editor
-DIDZ
Pm sent
what brand are the engine/gearbox mounts?
Bookmarks