MK4 R32 complete front brake kit incl. two sets of discs calipers etc.

[timiteo]

Complete brake kit including two sets of rotors (334mm), one set standard other dimpled and slotted. These are 5x100 off a MK4 R32.

Two calipers and carriers, EBC redstuff pads with about 40% use only. Rubber brake lines and bolts included just bolt on and go.

These will also fit a MK3 Golf VR6 and MK4 Golf GTI as well as some Audi A3 and S3 with 5x100 PCD and I can supply the hardware needed to fit them on VR6 and MK4 GTI.

$600 for the kit.

PM me if interested located 2234. Shipping available at buyers cost if required.

[Stuwey]

You say you've got additional hardware for these to fit Mk4 - would this apply to Polo 9N3, or would they bolt up (as i assume) as-is?

[timiteo]

You say you've got additional hardware for these to fit Mk4 - would this apply to Polo 9N3, or would they bolt up (as i assume) as-is?

Polo has the same hubs as MK3 and MK4 correct? If so they will fit with the hardware which centres the caliper over the disc.

Tim

[timiteo]

Bump still available and ready to bolt on. They stopped so hard on my VR6 my head hit the steering wheel!

Sent from my Nexus 5X using Tapatalk

[LeStig]

Hom much for just the callipers ???
I'm not keen on used discs ....

[timiteo]

Hom much for just the callipers ???
I'm not keen on used discs ....

Minus discs $500.

[Billecartz]

I would be interested in the discs depending on how worn they are.

[LeStig]

Postage on callipers to 2536 please

Thanks !!

[timiteo]

I would be interested in the discs depending on how worn they are.

Discs are in fair condition, slotted ones would need a machine but standard ones are good.

Postage on callipers to 2536 please

Thanks !!

Sorry mate didn't see your post. I'll grab a quote today for you and PM you.

[timiteo]

Bump

Sent from my Nexus 5X using Tapatalk