Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: 16x7 Oz Racing Cygnus wheels

  1. #1
    Join Date
    Mar 2014
    Location
    Bundoora, Victoria
    Posts
    1,002
    Users Country Flag

    16x7 Oz Racing Cygnus wheels

    Selling a set of Oz Racing Cygnus.

    Wheels are in excellent condition, one with minor gutter rash, centre caps are in good condition.

    2 wheels have brand new tyres never been driven on, colour markings still present.
    Other two are in good condition.

    CB; Is around 56.1mm definitely less than 57.1mm, unfortunately this is why I am selling them.
    16x7 ET49
    PCD; 5x100

    Located in Bundoora, VIC.

    O4 1313 O7 O5

    PRICE DROP $200.

    Photos below:

    Wheels;
    https://dl.dropboxusercontent.com/u/...s/IMG_7035.JPG
    https://dl.dropboxusercontent.com/u/...s/IMG_7036.JPG
    https://dl.dropboxusercontent.com/u/...s/IMG_7038.JPG
    https://dl.dropboxusercontent.com/u/...s/IMG_7039.JPG

    Tread;
    https://dl.dropboxusercontent.com/u/...s/IMG_7042.JPG
    https://dl.dropboxusercontent.com/u/...s/IMG_7043.JPG
    https://dl.dropboxusercontent.com/u/...s/IMG_7044.JPG
    https://dl.dropboxusercontent.com/u/...s/IMG_7045.JPG

    Marks;
    https://dl.dropboxusercontent.com/u/...s/IMG_7040.JPG
    https://dl.dropboxusercontent.com/u/...s/IMG_7041.JPG



    Set overview;
    Last edited by stefcio007; 23-04-2016 at 02:19 PM. Reason: Reason for selling, centre bore

  2. #2
    Join Date
    Oct 2007
    Location
    Bairnsdale & Ferntree Gully, Victoria
    Posts
    7,491
    All my old wheels turning up for sale

  3. #3
    Join Date
    May 2013
    Location
    Yallambie, Melbourne
    Posts
    259
    Users Country Flag
    yeh wtf, slap some 195 45 on those bad boys n run them dude. i was close to buying them

  4. #4
    Join Date
    Mar 2014
    Location
    Bundoora, Victoria
    Posts
    1,002
    Users Country Flag Thread Starter
    I am sure that the centre bore is less than 57.1mm, unless I was doing something wrong. I will check again but this is the main reason for selling. Otherwise I would be running with them.
    Edit; CB is something around 55-56mm, probably 56.1mm which is Subaru spec.
    Last edited by stefcio007; 25-11-2015 at 06:20 PM.
    Past - '95 VW Golf MK3 VR6
    Present - '11 Ford Focus LW Diesel (PSA DW10C)

  5. #5
    Join Date
    Oct 2007
    Location
    Bairnsdale & Ferntree Gully, Victoria
    Posts
    7,491
    just bore it out

  6. #6
    Join Date
    Mar 2014
    Location
    Bundoora, Victoria
    Posts
    1,002
    Users Country Flag Thread Starter
    Where can I get something like that done?
    What cost? If not much then maybe I will.

  7. #7
    Join Date
    Sep 2010
    Location
    Southern Highlands NSW
    Posts
    762
    Users Country Flag
    you bought these not knowing that the centre bore was too small for the vr6?
    Polo GTI
    T-Roc R
    Tiguan R

  8. #8
    Join Date
    Oct 2007
    Location
    Bairnsdale & Ferntree Gully, Victoria
    Posts
    7,491
    I can arrange to have it done. Cost I'm not 100%, prob looking at 150 for all 4

  9. #9
    Join Date
    Mar 2014
    Location
    Bundoora, Victoria
    Posts
    1,002
    Users Country Flag Thread Starter
    Quote Originally Posted by VR28LT View Post
    you bought these not knowing that the centre bore was too small for the vr6?
    It wasn't in the listing and since I saw these on a VR before I assumed they would fit.
    Rookie mistake.

  10. #10
    Join Date
    Mar 2014
    Location
    Bundoora, Victoria
    Posts
    1,002
    Users Country Flag Thread Starter

    Quote Originally Posted by dylan8 View Post
    I can arrange to have it done. Cost I'm not 100%, prob looking at 150 for all 4
    I'll have a think about it if I don't get any takers.

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |