Front to back never diagonal
Tyres are usually recommended to rotate at 10,000km intervals
Printable View
It depends on the tread pattern whether you have a directional tyre or asymmetric.
The directional tyre will have an arrow marking direction of rotation and can only be fitted on one side. The tread pattern is designed to run one way only. These can only be swapped back to front.
The asymmetric tyres can be run either way and allow a 4 wheel rotation. Most tyres these days are asymmetric except for some higher end performance tyres are still directional.
Sent from my iPhone using Tapatalk
I must be old school then as way back we were told that radials would run lumpy if made to run "backwards" so have always done mine on same side Got plenty of running so cant be too bad to do it that way
The best I can describe it is that the alignment of the "rubber" and the various belts when new is IIIIIIII and on the drive axle they gradually go ////////, so you reverse the rotation with the goal of eventually getting back to IIIIIIIIIII.
That's the internal advantage. Externally it can assist in removing feathering or mild saw-toothing.
That's the "How can I explain this to my Mum" version.
There are many resources out there. Here is one.
Tire Rotation: How and Why to Rotate Your Tires | Bridgestone Tires
Combine that with "best on rear" and some compromises eventually have to be made.
Thanks all for the prompt replies.
Its a Tiguan Highline Rline with Continental 255/40 R 20 V XL SUV Tyre's
I may have miss read the tyre markings, but I don't see any arrows on the Tyre's to show direction
Tire Rotation: How and Why to Rotate Your Tires | Bridgestone Tires
If they are non-directional, is the "REARWARD CROSS" the best rotation for my tyre's ?
yes, rearward cross