Tiguan IS38 and Big turbo upgrades

[REXman]

Friggin awesome can't wait to get mine sorted.

[Melbourne_Tiggy]

Happy 1st birthday to this thread!

12 months ago, I nervously took the plunge on an IS38 turbo swap on a Tig...to be one of the first in Aus to give it a go....

12 months later there are 9 turbo swapped Tigs across Aus - 5 is38 Tigs and 4 hybrid is38 Tigs, that have gone on this journey on this forum.

Let’s see people continue to try new things, push the boundaries and take the Tig to the next level. Full engine build big turbo anyone???? Maybe Guy Harding can create the Frankenmumster v2.....600HP would be crazy.

[davman]

12 months later there are 9 turbo swapped Tigs across Aus - 5 is38 Tigs and 4 hybrid is38 Tigs, that have gone on this journey on this forum.

Thanks so much for all of your Trailblazing efforts. I know that I feel a lot less apprehensive doing mine now.
Cheers

[INASNT]

Happy 1st birthday to this thread!

12 months ago, I nervously took the plunge on an IS38 turbo swap on a Tig...to be one of the first in Aus to give it a go....

12 months later there are 9 turbo swapped Tigs across Aus - 5 is38 Tigs and 4 hybrid is38 Tigs, that have gone on this journey on this forum.

Let’s see people continue to try new things, push the boundaries and take the Tig to the next level. Full engine build big turbo anyone???? Maybe Guy Harding can create the Frankenmumster v2.....600HP would be crazy.

Nice work

[davman]

Ooops, looked what arrived today. 06K 145 874G - IS38

[Beedub]

Nice one davman. What else are planning on doing?

[INASNT]

Ooops, looked what arrived today. 06K 145 874G - IS38

The one for sale on skoda FB page?

[davman]

No I got this from The Netherlands.

I am going to be doing a build, where the budget is strictly $5,000
So the turbo cost me $1200 landed- being virtually new - however it has been tested prior to sale, but is as clean as a whistle (no soot at all in the exhaust side). The seller had quite a few of them - all the same.
At the moment I am leaning towards taking it to Gordie at Etuners Motorsport in Melb, and he will put a CTS DP, and CTS Inlet pipe on it, then run a Stage 3 and DSG Tune over it all. I have already dropped a BMS air filter into it, and may do the airbox mod.
All in all this should bring it pretty much in on budget. I am not chasing a figure at all, just looking to get the best bang for buck - however by all accounts it will probably end up around the 225awkw - particularly as I am chasing an early spool up as possible - and longevity. That should be heaps enough for me.

[Beedub]

That will totally transform the car.

[INASNT]

No I got this from The Netherlands.

I am going to be doing a build, where the budget is strictly $5,000
So the turbo cost me $1200 landed- being virtually new - however it has been tested prior to sale, but is as clean as a whistle (no soot at all in the outlet). The seller had quite a few of them - all the same.
At the moment I am leaning towards taking it to Gordie at Etuners Motorsport in Melb, and he will put a CTS DP, and CTS Inlet pipe on it, then run a Stage 3 and DSG Tune over it all. I have already dropped a BMS air filter into it, and may do the airbox mod.
All it all this should bring it pretty much in on budget. I am not chasing a figure at all, just looking to get the best bang for buck - however by all accounts it will probably end up around the 225awkw - particularly as I am chasing a an early spool up as possible - and longevity. That should be heaps enough for me.

How did you find that in Netherlands?