Razor80 Stage 3 Allspace R Build

[INASNT]

Just wondering if having all this work done, you need the car recertified by Vic Roads

I think in NSW once you increase power by more than 20% you need to decertify the vehicle
link - see page 3 item 2;

The muppets at Vicroads are clueless.

I used to import cars from Japan, had to take them to Vicroads for compliance check, they had no idea most of the time.

[Razor80]

Golf R rear muffler now fitted through the blanking plates but I decided to leave the chrome section in place as I think it'll look a little odd on the R-line body kit without it.

The sound is pretty insane pops at every gear change and the crackle is on another level!!! Saying that would be fine the circuit but is waaaaay to loud for my ears just with normal driving! I was s**ting bricks at one stage as police followed me for ages shortly after leaving the place but thankfully turned away!!!

So the remedy is to install the centre resonator to hopefully quieten things down. Otherwise I'm not sure what to do...
I was planning on installing the Golf resonator but we ran out of time at the work shop as this took around 5 hrs to install the custom pipework etc, plus another guy was getting his car fitted with a custom 4" turbo back system, so time waisted there.

Here's some pics - Was hard picking the tips as most didn't fit through the trim piece or were just plain ugly!

[iDiesel]

Looks great!
Maybe some video of the sound too ... ha ha

[Razor80]

No vids yet, a bit late now. I will try take some tomorrow on a quiet road. Definitely be putting some sort of res in there as its annoying my ears and at the small risk of losing some power! However this would suit those younger the me haha

Final pics.

[INASNT]

Looks good.. Just remember there is no going back now that the mods have started..... hahahahahaha......

Get the valves put on and the controller

[Razor80]

Looks good.. Just remember there is no going back nownthatbthe moda have started..... hahahahahaha......

Get the valves put on and the controller

Definitely far from turning back now haha ... Winder whats next on the agenda..

Unfortunately we had to cut the valves off as where the original bends was would've been a restriction to extend the pipes to the valance. It's amazing how short the width is of the Golf R tail tips compared to the Tiguan. Rear muffler lines up perfectly on the mounts and iooks identical in shape/size to the Tiguan's just without the added valves. Saying this the tail tips are no where to be seen behind the bumper hence the extention by roughy 30cm each spout.

[iDiesel]

Golf R rear muffler now fitted through the blanking plates but I decided to leave the chrome section in place as I think it'll look a little odd on the R-line body kit without it.

Was it easy to leave the home bits of the blanking plate on?
Are there easily separable from each other, or did you have to cut out the blanking piece?


Final pics look awesome too by the way.
I like how you have staggered them.

[Razor80]

Was it easy to leave the home bits of the blanking plate on?
Are there easily separable from each other, or did you have to cut out the blanking piece?


Final pics look awesome too by the way.
I like how you have staggered them.

Yes, actually it was easier to remove just the black plastic piece and leave the chrome surround in place. It's like tongue and groove kinda thing that attaches it to the chrome surround. We just prised it with a thin trim tool and used another tool to stop going back in place. Very simple to do and will come out quite easily with patience.

Also on the back of the bumper there is a thin plastic lining which you can leave in place or remove, I've left mine in place as it just looked cleaner.

Also on the Highline/R-Line bodykit if you removed the chrome section i'll expose quite a large section of the bumper and thought it'll look odd if not from the front but would definitely be from the side on profile.

[PDMJO]

Curious to know where you got the work done, and more importantly, if you'd recommend them

[INASNT]

And what the total cost was