Mk2 Tiguan VCDS Tweaks

[Jap]

Yeah that’s a 2 sensor, rain closing doesn’t work on them,

[Hole46]

Yeah that’s a 2 sensor, rain closing doesn’t work on them,

Always wondered why it wouldn’t work on mine, bugger.


Sent from my iPad using Tapatalk

[DR074]

Thanks guys, that answers a few questions. Rain close is one of the mods a couldn't get working.

[pbrowne]

I need to make the reversing lights brighter. I recall seeing a VCDS tweak for this, but now cannot find it again. Can anyone point me to this info or describe the steps?

I traded my SE for an R-line. While the SE's reversing lights were just fine, they are quite dim on the new vehicle.

[pbrowne]

Lane assist has been much improved. My Tiguan was built in Puebla on May 1, 2018. It appears that VW has now precluded any changes to the steering lane assist feature, BUT they seem to have programmed it right! Non ping-ponging between lane markings and tracks where I try to drive in the lane -- center, left, or right.

Now if I could just get rid of that take-over-steering nag message!

[adrianb]

Finally got my **** together and did the following yesterday with my VCDS cable thanks to this thread:

- TMC enabled
- Gauge sweep enabled
- Nag screen disabled
- Beep when lock/unlock enabled (although wife wants it turned back off)
- Orange coloured active display theme set

Awesome

[PIT]

Hello, I would like to ask if you know the coding when tern the signal on of the high beam (halogen Headlights), tern on and the fog lights. The coding will be with OBD11. Thank you.

[hyskh]

Hi All, First post, I've had my Tiggy 162TSI for a few weeks now and would like to enable TMC and Dynamic speed sign recognition as VW wont do it. I've read it can be done here in this forum, and rather than mucking about myself, I was wondering if there is someone here in Melbourne that is willing to assist? I live in the South Eastern Suburbs but am willing to accommodate anyone able to help.

I am thinking about getting the tools froim Ross Tech, but am concerrned about making the wrong changes or accidental changes that could stuff up the software.

Any help would be appreciated.

Thanks

[INASNT]

Hi All, First post, I've had my Tiggy 162TSI for a few weeks now and would like to enable TMC and Dynamic speed sign recognition as VW wont do it. I've read it can be done here in this forum, and rather than mucking about myself, I was wondering if there is someone here in Melbourne that is willing to assist? I live in the South Eastern Suburbs but am willing to accommodate anyone able to help.

I am thinking about getting the tools froim Ross Tech, but am concerrned about making the wrong changes or accidental changes that could stuff up the software.

Any help would be appreciated.

Thanks

Make that me too, I am also in SE Mel and want someone to show me how to do the tweeks.

I have a VAG 11.11 cable and VCDS software someone gave me 7 years ago which I never used, will this work on my TIG?

[PeteC]

Here is a start/stop memory module with invisible service mode. No need to change anything in VCDS.

NEW! Start Stop Memory module with SERVICE MODE! / Start-Stop SSA memory | eBay