View Poll Results: Do you prefer Traffic Sign Recognition or Navigation Speed Limit

Voters
92. You may not vote on this poll
  • Traffic Sign Recognition

    24 26.09%
  • Speed Limit on the Navigation System

    7 7.61%
  • A combination of the two, which VAG doesn't allow in Australia.

    61 66.30%
Page 28 of 30 FirstFirst ... 182627282930 LastLast
Results 271 to 280 of 300

Thread: A guide to enable EU specific features for AU Spec Tiguans

  1. #271
    Join Date
    Aug 2018
    Location
    Vic
    Posts
    53

    Quote Originally Posted by Aus_fas View Post
    I enabled it following steps from this thread. However, fusion mode does not work so of no use as the system will show incorrect speed if no speed sign is detected. Unless fusion is enabled , it's useless IMO.

    Sent from my HTC U11 using Tapatalk
    Mine shows no speed sign if none is detected. Also goes blank after a while if you haven’t been past a sign recently on say a freeway.

    The only time I have had a false reading is when I went past a Woolies truck on the freeway which has a 90 sign on the back and it picked that up.

  2. #272
    Join Date
    Nov 2016
    Location
    canberra
    Posts
    86
    Quote Originally Posted by MartoWolfie View Post
    Did you get the speed limit back showing on gps infotainment when you reverted?
    There are few settings mentioned in the steps that are already selected. Make sure you don't you don't unselect those once you revert back.

    I was then able to get the speed signs back on info

    Sent from my HTC U11 using Tapatalk

  3. #273
    Join Date
    Dec 2018
    Location
    Perth
    Posts
    16
    Quote Originally Posted by Aus_fas View Post
    There are few settings mentioned in the steps that are already selected. Make sure you don't you don't unselect those once you revert back.

    I was then able to get the speed signs back on info

    Sent from my HTC U11 using Tapatalk
    Would you happen to know which setting were already selected? When I did it first time I used the app which was a mistake since I dont what setting the app done.
    OR
    If you cant remember is there any chance you could look through the code for the road sign detection and tell me what is enabled/disabled etc. in your car?
    Thanks
    Last edited by MartoWolfie; 29-12-2018 at 11:20 AM.

  4. #274
    Join Date
    Nov 2016
    Location
    canberra
    Posts
    86
    Quote Originally Posted by MartoWolfie View Post
    Would you happen to know which setting were already selected? When I did it first time I used the app which was a mistake since I dont what setting the app done.
    OR
    If you cant remember is there any chance you could look through the code for the road sign detection and tell me what is enabled/disabled etc. in your car?
    Thanks
    See attached

    Sent from my HTC U11 using Tapatalk

  5. #275
    Join Date
    Dec 2018
    Location
    Perth
    Posts
    16
    From the first picture all the code mentioned i reverted in reverse. Like deactivated byte 5 bit 2 in control unit 17 and so on. So everything i done was opposite to revert the road sign detection. I m just bit confused where you have byte 24 bit 6 crossed out in 5F. I deactivated it part of reverting. So should i leave it activated?
    Sorry for being a pain.

  6. #276
    Join Date
    Nov 2016
    Location
    canberra
    Posts
    86
    Quote Originally Posted by MartoWolfie View Post
    From the first picture all the code mentioned i reverted in reverse. Like deactivated byte 5 bit 2 in control unit 17 and so on. So everything i done was opposite to revert the road sign detection. I m just bit confused where you have byte 24 bit 6 crossed out in 5F. I deactivated it part of reverting. So should i leave it activated?
    Sorry for being a pain.
    Leave it activated, its enabled by default.

    Sent from my HTC U11 using Tapatalk

  7. #277
    Quote Originally Posted by Aus_fas View Post
    Leave it activated, its enabled by default.

    Sent from my HTC U11 using Tapatalk
    Please, could you write step by step because stay confusion the process. Best regards.

    Enviado de meu SM-G950F usando o Tapatalk

  8. #278
    Join Date
    Dec 2018
    Location
    Perth
    Posts
    16
    Quote Originally Posted by Aus_fas View Post
    Leave it activated, its enabled by default.

    Sent from my HTC U11 using Tapatalk
    That makes sense. Thanks for your patience

  9. #279
    Join Date
    Aug 2018
    Location
    Sydney
    Posts
    725
    Users Country Flag
    Hi all
    interesting thread and making me contemplate some of the simpler tweaks
    Just looking at the OBDeleven site (AU) and noticed this
    A link to download the OBDeleven application will be included with your purchase, and can be accessed via your purchase history or confirmation email. The OBDeleven Android App is NOT available on the Australian or New Zealand Google Play Stores.
    Do I need to access or download OBD app from another country’s google play store or does the link they provide give a version that works on Android?
    2018 Allspace 162TSI R Line

  10. #280
    Join Date
    Nov 2016
    Location
    canberra
    Posts
    86

    Quote Originally Posted by iDiesel View Post
    Hi all
    interesting thread and making me contemplate some of the simpler tweaks
    Just looking at the OBDeleven site (AU) and noticed this

    Do I need to access or download OBD app from another country’s google play store or does the link they provide give a version that works on Android?
    Interesting I didn't notice that the app is no longer available. I believe the link version should work as the one that I got from the store a year ago still works. All you need is the.apk file IMO.

    Sent from my HTC U11 using Tapatalk

Page 28 of 30 FirstFirst ... 182627282930 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |