A guide to enable EU specific features for AU Spec Tiguans

Quote:

---

Originally Posted by Aus_fas

I enabled it following steps from this thread. However, fusion mode does not work so of no use as the system will show incorrect speed if no speed sign is detected. Unless fusion is enabled , it's useless IMO.

Sent from my HTC U11 using Tapatalk

---

Mine shows no speed sign if none is detected. Also goes blank after a while if you haven’t been past a sign recently on say a freeway.

The only time I have had a false reading is when I went past a Woolies truck on the freeway which has a 90 sign on the back and it picked that up.

Quote:

---

Originally Posted by MartoWolfie

Did you get the speed limit back showing on gps infotainment when you reverted?

---

There are few settings mentioned in the steps that are already selected. Make sure you don't you don't unselect those once you revert back.

I was then able to get the speed signs back on info

Sent from my HTC U11 using Tapatalk

Quote:

---

Originally Posted by Aus_fas

There are few settings mentioned in the steps that are already selected. Make sure you don't you don't unselect those once you revert back.

I was then able to get the speed signs back on info

Sent from my HTC U11 using Tapatalk

---

Would you happen to know which setting were already selected? When I did it first time I used the app which was a mistake since I dont what setting the app done.
OR
If you cant remember is there any chance you could look through the code for the road sign detection and tell me what is enabled/disabled etc. in your car?
Thanks

Quote:

---

Originally Posted by MartoWolfie

Would you happen to know which setting were already selected? When I did it first time I used the app which was a mistake since I dont what setting the app done.
OR
If you cant remember is there any chance you could look through the code for the road sign detection and tell me what is enabled/disabled etc. in your car?
Thanks

---

See attachedhttp://www.vwwatercooled.com.au/foru...0c91fd8b-1.jpghttp://www.vwwatercooled.com.au/foru...f0d4e568-1.jpg

Sent from my HTC U11 using Tapatalk

From the first picture all the code mentioned i reverted in reverse. Like deactivated byte 5 bit 2 in control unit 17 and so on. So everything i done was opposite to revert the road sign detection. I m just bit confused where you have byte 24 bit 6 crossed out in 5F. I deactivated it part of reverting. So should i leave it activated?
Sorry for being a pain.

Quote:

---

Originally Posted by MartoWolfie

From the first picture all the code mentioned i reverted in reverse. Like deactivated byte 5 bit 2 in control unit 17 and so on. So everything i done was opposite to revert the road sign detection. I m just bit confused where you have byte 24 bit 6 crossed out in 5F. I deactivated it part of reverting. So should i leave it activated?
Sorry for being a pain.

---

Leave it activated, its enabled by default.

Sent from my HTC U11 using Tapatalk

Quote:

---

Originally Posted by Aus_fas

Leave it activated, its enabled by default.

Sent from my HTC U11 using Tapatalk

---

Please, could you write step by step because stay confusion the process. Best regards.

Enviado de meu SM-G950F usando o Tapatalk

Quote:

---

Originally Posted by Aus_fas

Leave it activated, its enabled by default.

Sent from my HTC U11 using Tapatalk

---

That makes sense. Thanks for your patience

Hi all
interesting thread and making me contemplate some of the simpler tweaks
Just looking at the OBDeleven site (AU) and noticed this

Quote:

---

A link to download the OBDeleven application will be included with your purchase, and can be accessed via your purchase history or confirmation email. The OBDeleven Android App is NOT available on the Australian or New Zealand Google Play Stores.

---

Do I need to access or download OBD app from another country’s google play store or does the link they provide give a version that works on Android?

Quote:

---

Originally Posted by iDiesel

Hi all
interesting thread and making me contemplate some of the simpler tweaks
Just looking at the OBDeleven site (AU) and noticed this

Do I need to access or download OBD app from another country’s google play store or does the link they provide give a version that works on Android?

---

Interesting I didn't notice that the app is no longer available. I believe the link version should work as the one that I got from the store a year ago still works. All you need is the.apk file IMO.

Sent from my HTC U11 using Tapatalk