Note that some of the MQB tweaks for the Golf 7 will work, but not all as there are still differences between some modules.
Here are some that I've come across:
Rain closing:
The following coding must be used:
1. STG 09 (electrical wiring)
2. STG Access Permission -> Function 16
3. Enter free code 31347
4. STG Adjustment -> Function 10
5.
(14) Zugriffskontrolle 2-Regenschliessen auswählen Wert auf permanent anpassen
6. Set value to permanently
7. (26) Zugriffskontrolle 2-Menuesteuerung Regenschliessen auswählen
8. Value to active
9. STG 09 (electrical wiring)
10. Select STG - RLS (rain and light sensor)
11. Byte 0
12. Activate bit 1
13. Activate bit 2
Enable pointer / needle / staging (needle sweep)
In the gearshift lever insert, you have the option to activate the Zeigertest / the wiper / the staging of the Kombiinstrument with the VW Passat B8. When starting, all hands in the AI go back briefly to the stop and back to the basic position again. Possible for the new Active Info Display (Virtual Cockpit) as well as for the conventional monochrome version.
The following coding must be used:
1. Select STG 17 (control panel)
2. STG coding -> function 10
3. Byte 1
4. Activate bit 0
Sunroof (SAD) - Panoramadach Activate comfort openings via key
The VW Passat B8 allows you to open the built-in glass panorama roof (sunroof - SAD) automatically when you press and hold the radio remote control on the unlocking button in addition to the opening windows. When the vehicle is locked, the panoramic sliding roof is also closed together with the windows. If, during a service action by the dealer, the comfort function of the opening and closing has been deactivated, this can be restored.
The following coding must be used:
1. STG 09 (electrical wiring)
2. STG Access Permission -> Function 16
3. Enter access code 31347
4. STG Adjustment -> Function 10
5. Channel (10) access control Select 2-SAD Comfort close
6. Set value to active
7. Channel (11) access control 2-SAD Comfort open
8. Set value to active
Auto hold release speed
1. Select STG 03 (Brake electronics)
2. STG Adjustment -> Function 10
3. Select dynamic start-up assistant
4. value can be adapted accordingly
(default: normal)
Early - brake is released quickly and requires very little gas (shudderis no longer perceptible)
Normal - Factory Default (perceptible jerk when starting)
late - brake can late going and only with relatively large amount of gas (strong jerk when Start)
Alarm beep on lock / unlock (from VW GTI mk7 forum)
Go into [09] Central Electronics
Go into Secuity Access and enter 31347
Adaptation channels, and you are looking for:
(1)-Acknowledgement Signals -Akustische Rueckmeldung entriegen (un-lock acoustic feedback)
(2)-Acknowledgement Signals -Akustische Rueckmeldung verriegeln (lock acoustic feedback)
Set one or both to on if you wish.
Then set the following to "on"
Acknowledgement Signals -Menuesteuerung akustische Rueckmeldung (Acoustic lock menu)
This enables a menu setting in the "car" settings, "Locking" menu of the infotainment screen to set alarm chirp on or off when locking /unlocking the car and have the option to switch it on or off from the head unit.
Bookmarks