Rear View Camera

[5paul0]

I have been having trouble with the rear view camera not working. After doing a scan with OBDeleven (see data log below)

OBDeleven data log

Date: 2022-08-01 16:00

VIN:
Car: Volkswagen Passat
Year: 2018
Body type: Variant
Engine: CJXA
Mileage: 46809 KM

---------------------------------------------------------------
6C Rear View Camera

System description: RVC Compact
Software number: 5Q0980556B
Software version: 0231
Hardware number: 5Q0980556B
Hardware version: H12
ODX name: EV_CamSysRVRVCPANAMQBAB
ODX version: 006009
Long coding: 0184020163002017000040

Trouble codes:
B125C13 - Video line Open circuit
static
Date: 2022-07-07 09:47:53
Mileage: 45162 km
Priority: 5
Malfunction frequency counter: 3
Unlearning counter: 252
---: Passive

I tried to locate the trouble code B125C13 - Video line Open circuit, on the internet but could only find it associated with Audi cars, ( to do with the wiring harness going to the rear hatch ). Also when you start the car it gives the warning that Park Pilot is not working. I assume that it is the same fault as it is throwing no fault codes for the problem.

Would this be the same on the B8 VW Passat?
Can anybody give me some advice on the subject.

Thanks in advance

[kamold]

Wiring harness is damaged or the camera itself is faulty (more likely the former).

[MIG]

I would be going with Kamold's suggestion but would focus on the coax or fakra connector due to this camera module being all in one, e.g CAN bus goes directly to the camera, and OBDeleven can still talk to it, this would rule out power, ground and CAN wiring.

As far as I can see Audi uses the same module, so the posts you found on the rear hatch would be in the right ballpark.