is it ok to bring non-VW to this? I guess I'll need to supply the wheelbase and width measurements?
Hello,
I was wondering if anyone would be interested in getting their cars weighed using my Proform 5000lbs (2200Kg) vehicle scale.
Features of the scale are:
PROFORM's vehicle scale has been upgraded and now features Cross weight, Side/Side weight, and Front/Rear weight in addition to the standard weight and percentage for each wheel and total vehicle weight. The individual scale pads are 14 ½" x 9 ½" x 2 ½" with a 1,250 lb capacity per pad for a total scale capacity of 5,000 lbs. Scale is accurate to 1/10 of 1%.
If anyone was interested in corner weights and distribution this is a good opportunity to check.
Last time we held the gathering it was at a venue that was not low suspension friendly. So a venue will be required.
If there is sufficient interest the where and when can be the sorted.
Putting it out there.
Cheers
Karl
is it ok to bring non-VW to this? I guess I'll need to supply the wheelbase and width measurements?
RiceBurger
http://www.flickr.com/photos/japtaxi/
No problem. An 86 graced the last session.
What is a car weight session worth?
Rising Blue MY10 Passat R36
BLACK '97 Mk3 GL 2.0L
White '82 MK1 Cabrio 1.8L
Vice-President - VWDCQ (VW Drivers Club of Queenland inc)
Nothing. Just a handshake and a chat. A chance to meet other members.
That sounds awesome! Come to Mexico!
Not many takers?
I would be keen.
Rising Blue MY10 Passat R36
BLACK '97 Mk3 GL 2.0L
White '82 MK1 Cabrio 1.8L
Vice-President - VWDCQ (VW Drivers Club of Queenland inc)
still keen! havn't yet measured the actual wheelbase and width yet but google said wheelbase is 2060mm, overall width is 1395mm.
RiceBurger
http://www.flickr.com/photos/japtaxi/
Bookmarks