Support VWWC

Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Driver's side mirror problem

  1. #1
    Join Date
    Aug 2013
    Location
    Sydney
    Posts
    339
    Users Country Flag

    Question Driver's side mirror problem

    Hi guys,

    About a year ago, the driver's side mirror on my CC got stuck in and wouldn't fold out. I tapped on it with a bit of force and it started working again like it never happened.
    A couple of weeks ago I started having issues with the same mirror. The mirror would fold in slowly, but it wouldn't fold out. If I fold it out manually, it folds back in... I had to do that a couple of times until it stays out.
    I have also noticed the passenger's side mirror "waits" for the driver's side mirror for a couple of minutes, then it folds out.
    Any idea what's causing this to happen? Is there anything that I can do to sort this out?

    Many Thanks,
    Vexed

  2. #2
    Join Date
    Aug 2013
    Location
    Sydney
    Posts
    339
    Users Country Flag Thread Starter
    I can hear some grinding noise now, I think there is something broken inside... Will try to open it later and see what I can find...

  3. #3
    Join Date
    Jun 2011
    Location
    Sydney NSW
    Posts
    1,144
    Users Country Flag
    Sounds like something has gotten inside and is binding. This could then have damaged or broken something in the mechanism.
    --


  4. #4
    Join Date
    Aug 2013
    Location
    Sydney
    Posts
    339
    Users Country Flag Thread Starter
    Quote Originally Posted by wai View Post
    Sounds like something has gotten inside and is binding. This could then have damaged or broken something in the mechanism.

    I hope not... If this is the case, do I need to replace the whole mirror? Or I can buy specific parts to fix it?

  5. #5
    Join Date
    Mar 2009
    Location
    Sydney, NSW
    Posts
    13
    U should be able to buy the mech to fix it

  6. #6
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,523
    Users Country Flag
    Look for a stip of felt tape, flapping about loosely, where the mirror housing pivots. If it's there, rip it out. It's what usally causes them to bind up.
    '07 Transporter 1.9 TDI
    '01 Beetle 2.0

  7. #7
    Join Date
    Aug 2013
    Location
    Sydney
    Posts
    339
    Users Country Flag Thread Starter
    Thanks guys, will let you know how I go later.

    Thanks...

  8. #8
    Join Date
    Aug 2013
    Location
    Sydney
    Posts
    339
    Users Country Flag Thread Starter
    Hi guys, I removed everything from the mirror except for the frame that holds everything... How do you remove that to expose the motor?

    I couldn't find any mesh or anything in the way inside...
    By the way, I removed the bottom part of the mirror as well, but I forgot to take a pic...

    Thanks...
    Attached Thumbnails Attached Thumbnails Driver's side mirror problem-wp_20150820_20_25_40_pro-jpg  
    Last edited by Vexed; 20-08-2015 at 09:36 PM.

  9. #9
    Join Date
    Aug 2013
    Location
    Sydney
    Posts
    339
    Users Country Flag Thread Starter
    I took the car over to the dealership to check the DSG, and I asked them to check the mirror as well. The mirror and motor need to be replaced, I was quoted $1050!!!
    I will try to find it somewhere else....

  10. #10
    Join Date
    Aug 2013
    Location
    Sydney
    Posts
    339
    Users Country Flag Thread Starter

    Can someone please tell me what is the part number of the mirror? I understand each part in the mirror has a number, but I'm looking for the frame which holds everything and includes the motor. I have been searching around with no luck...

    Thanks...

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |