Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: When to run Forged internals on a Bora V6 4Mo?

  1. #1
    Join Date
    Jun 2008
    Location
    Cronulla, NSW
    Posts
    941
    Users Country Flag

    When to run Forged internals on a Bora V6 4Mo?

    Howdy dubbers!

    I am very close to pulling the trigger on a (slow) build of a Supercharged V6 Bora. When does the engine need to be cracked open for forged internals?

    I am going with a V9f charger stage 2 and then going to run a water/meth kit - tuned accordingly on a c2 supplied ecu.

    do we even need internals at this stage?
    MY02 Bora V6 4Mo|Matte Black plastidip|VTDA|R32 Exhaust|R32 dampers and springs|TT pedals|R32 steering wheel|17" 8L S3 rims|R32 sways|Blue Haldex|EBC reds

  2. #2
    Join Date
    Jun 2006
    Location
    Orange NSW
    Posts
    5,745
    How much boost do you want to pump into it?

    APR Tuned | KW Suspension | INA Engineering | Mocal Oil Control |
    Website: http://www.tprengineering.com
    Email: chris@tprengineering.com

  3. #3
    Join Date
    Jun 2008
    Location
    Cronulla, NSW
    Posts
    941
    Users Country Flag Thread Starter
    Supercharged, so anywhere from 5 to 8psi tops.
    MY02 Bora V6 4Mo|Matte Black plastidip|VTDA|R32 Exhaust|R32 dampers and springs|TT pedals|R32 steering wheel|17" 8L S3 rims|R32 sways|Blue Haldex|EBC reds

  4. #4
    Join Date
    Jul 2011
    Location
    Slacks Creek QLD
    Posts
    214
    Users Country Flag
    5-8psi i wouldnt bother too much its not really alotta boost
    90 TSI 1.4T

  5. #5
    Join Date
    Jun 2006
    Location
    Orange NSW
    Posts
    5,745
    Quote Originally Posted by Dyldo View Post
    Supercharged, so anywhere from 5 to 8psi tops.
    Should be fine.

    If you're worried, fit a set of ARP rod bolts.

    APR Tuned | KW Suspension | INA Engineering | Mocal Oil Control |
    Website: http://www.tprengineering.com
    Email: chris@tprengineering.com

  6. #6
    Join Date
    Sep 2010
    Location
    Melbourne, Victoria
    Posts
    370
    Users Country Flag
    Make sure you get some decent intercooling going.

    My previous car, an A4 2.8 quattro I put a PES G2 supercharger kit on; decided to bolt on a smaller pulley (10psi) and slowly melted a piston, ha.

  7. #7
    Join Date
    Dec 2007
    Location
    Girraween
    Posts
    505
    Users Country Flag
    Quote Originally Posted by DNA Tuning View Post
    Make sure you get some decent intercooling going.

    My previous car, an A4 2.8 quattro I put a PES G2 supercharger kit on; decided to bolt on a smaller pulley (10psi) and slowly melted a piston, ha.
    x2. Or at least run water-meth injection. Sebs got a real trick set-up going on his VR6 Turbo.
    Euro Revolution - eurorevolution@live.com.au
    Importing Quality Performance and Spare parts for Audi & Watercooled VW's
    New website almost up and running ... http://eurorevolution.webs.com/index.htm
    Courtney

  8. #8
    Join Date
    Jun 2008
    Location
    Cronulla, NSW
    Posts
    941
    Users Country Flag Thread Starter
    Quote Originally Posted by whiteVR6 View Post
    x2. Or at least run water-meth injection. Sebs got a real trick set-up going on his VR6 Turbo.
    yeah sorry gang, I meant to put down that i am after a decent water/meth (or at least water) injection kit. Prob Devil's Own. Only because for way less than a grand its free hp and a big safety margin.
    MY02 Bora V6 4Mo|Matte Black plastidip|VTDA|R32 Exhaust|R32 dampers and springs|TT pedals|R32 steering wheel|17" 8L S3 rims|R32 sways|Blue Haldex|EBC reds

  9. #9
    Join Date
    Dec 2007
    Location
    Girraween
    Posts
    505
    Users Country Flag
    Quote Originally Posted by Dyldo View Post
    yeah sorry gang, I meant to put down that i am after a decent water/meth (or at least water) injection kit. Prob Devil's Own. Only because for way less than a grand its free hp and a big safety margin.
    Since you own a servo have you thought about e-85?
    Also your best to speak to Mark @ Re-code to get a custom tune for our conditions.
    Euro Revolution - eurorevolution@live.com.au
    Importing Quality Performance and Spare parts for Audi & Watercooled VW's
    New website almost up and running ... http://eurorevolution.webs.com/index.htm
    Courtney

  10. #10
    Join Date
    Jun 2008
    Location
    Cronulla, NSW
    Posts
    941
    Users Country Flag Thread Starter

    Quote Originally Posted by whiteVR6 View Post
    Since you own a servo have you thought about e-85?
    Also your best to speak to Mark @ Re-code to get a custom tune for our conditions.
    we've just changed our tanks for the brand new 98ron formula from Shell. Nationwide rollout should come soon. Haven't thought of e85 tbh, and i do have easy access to 20L drums of 100.1 RON race fuel.

    As for the tune, JLT recommends c2 for the tune - so ship the ecu off to the US with a list of all the mods and go from there. In saying that though, am always open to options and recode seem to be getting great results.
    MY02 Bora V6 4Mo|Matte Black plastidip|VTDA|R32 Exhaust|R32 dampers and springs|TT pedals|R32 steering wheel|17" 8L S3 rims|R32 sways|Blue Haldex|EBC reds

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |