Results 1 to 5 of 5

Thread: MAF - Wires = Fail.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2007
    Location
    Sydney
    Posts
    918
    Did the car choke/ cut out at high revs @ 4k+ ?

    happening to my car too.

  2. #2
    Join Date
    Dec 2006
    Location
    Kilsyth, VIC
    Posts
    6,315
    Users Country Flag Thread Starter
    I have jammed (not that you really can jam it in) it into the hole where it goes and I believe it happens when you accelerate enough for it to come undone.

    It's not a case of under XXrpm it fails, just fails in general.


    If it has an engine or heartbeat it's going to cost you. | Refer a Friend - AussieBroadband $50 Credit

  3. #3
    Join Date
    Dec 2006
    Location
    Kilsyth, VIC
    Posts
    6,315
    Users Country Flag Thread Starter
    Well I have wired in the new plug as well as a replacement plug for one of the wheel speed sensors.

    ABS still reports that the pump is rubbish, but at least the wheel speed sensor works now

    Cleared the codes and everything is running fine, although I did see this error again:

    00533 - Idle Speed Regulation
    15-00 - Adaptation Limit (Add) Not Reached

    This only came up after it was idling for a while when I was checking things with VAG-COM. There is a good chance it's because I don't have a idle stabiliser. (either that or an air leak or a faulty MAF :O) I have cleared it, but will wait and see what happens.


    If it has an engine or heartbeat it's going to cost you. | Refer a Friend - AussieBroadband $50 Credit

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |