Results 1 to 2 of 2

Thread: Intake piping

  1. #1
    Join Date
    Jun 2008
    Location
    Cronulla, NSW
    Posts
    941
    Users Country Flag

    Intake piping

    I have a Modshack VTDA intake on my 4Mo, and currently i have a piece of Bunnings thick black rubber plumbing tubing linking the intake unit to the MAF housing. It is the same diameter, but I can't remember what that diamater is.

    Trouble is it looks filthy ghetto and isn't the right fit, so its warping a bit. Ideally I'd like some stainless but failing that maybe some intercooler piping? either way, where in heck do I get some?
    MY02 Bora V6 4Mo|Matte Black plastidip|VTDA|R32 Exhaust|R32 dampers and springs|TT pedals|R32 steering wheel|17" 8L S3 rims|R32 sways|Blue Haldex|EBC reds

  2. #2
    Join Date
    Jan 2008
    Location
    Sunshine Coast
    Posts
    4,016
    Users Country Flag

    You can buy silicon IC joiners in red, blue etc off e-bay quite cheaply by themselves, and pieces of alloy pipe as well. My Modshack outlet is 3", but it's a specific thing I ordered. The MAF diameter on the stock TDI is 3" so you'd have to meaure yours to get an idea, wrap a piece of string around it and measure the circumference and divide by 3.14 to get the diameter if you don't have verniers or a C clamp etc.
    Last edited by Greg Roles; 25-05-2010 at 06:47 PM.
    2014 Skoda Yeti TDI Outdoor 4x4 | Audi Q3 CFGC repower | Darkside tune and Race Cams | Darkside dump pDPF | Wagner Comp IC | Snow Water Meth | Bilstein B6 H&R springs | Rays Homura 2x7 18 x 8" 255 Potenza Sports | Golf R subframe | Superpro sways and bushings | 034 engine mounts | MK6 GTI brakes |

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |