Support VWWC

Results 1 to 10 of 10

Thread: Importing a Milltek exhaust from the UK?

  1. #1
    Join Date
    Dec 2013
    Location
    Sydney
    Posts
    57

    Importing a Milltek exhaust from the UK?

    After getting the APR stage 1 tune i'm now considering a Milltek exhaust system, just trying to decide where to get it from and whether to get turbo back or cat back. The agents that supply Milltek in Sydney seem fairly expensive (from what i have seen so far although i'm still waiting to get a few quotes back).
    I got a quote from a company in the UK (TSR Performance VW / Audi / Seat / Skoda - Performance Tuning ) and they were quoting the following:

    Non res cat back with AEV = $1,307 (includes shipping to Oz)
    without AEV = $1,017 (includes shipping to Oz)

    Non res turbo back (cat back, down pipe & cat) with AEV = $2,324 (includes shipping to Oz)
    without AEV = $2,034 (includes shipping to Oz)

    I'd imagine i'd need to add another $200 for installation at Volksmuller or the like, but it still seems a fair bit cheaper than buying direct in Oz?

    Just not sure whether i need AEV, and whether the full system is worth the extra $....any ideas what difference in performance a full system would give me? And is the AEV worth considering?

    Has anyone used TSR in the UK before?

    Cheers

    Will

  2. #2
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,979
    Users Country Flag
    Not forgetting import duty? Exhaust > Golf Mk6 2009- on > VW Golf > VW Specialists > PSI Tuning - VW Specialists Try PSITuning as well. A friend of mine does the quotes and shipping.

    Gavin
    PS nothing wrong with TSR that I am aware of, although it ages since Tim was there himself.
    Last edited by h100vw; 20-06-2014 at 08:35 PM.

  3. #3
    Join Date
    Dec 2013
    Location
    Sydney
    Posts
    57
    Thread Starter
    Good call, i didn't think about import tax. How do i work out what that could potentially sting me for?

    Doesn't it need to be over $1000 in value for it to attract import duty???

    Cheers will email PSI now....

  4. #4
    Join Date
    Dec 2013
    Location
    Sydney
    Posts
    57
    Thread Starter
    Also, if i go for the full turbo back system, do i need to go from stage 1 APR tune to Stage 2 to get full benefits?

  5. #5
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,979
    Users Country Flag
    I'd say yes for the turbo back question. Duty is 10% on the total value, without shipping I believe. But I could be wrong.

    Might be worth 2 parcels, if the maths works out in your favour.

    Gavin

  6. #6
    Join Date
    Dec 2006
    Location
    Kilsyth, VIC
    Posts
    6,304
    Users Country Flag
    Check here: When buying over the internet
    The example sis going to be very close to your situation with a $1200 value + shipping

    Importing a Milltek exhaust from the UK?-screen-shot-2014-06-21-9-06-09-am-png


    Technically if you split the order you're still liable, but that's down to if customs notice and put them together.


    If it has an engine or heartbeat it's going to cost you. | Refer a Friend - AussieBroadband $50 Credit

  7. #7
    Join Date
    Jan 2008
    Location
    Canning Vale, Perth, WA
    Posts
    2,397
    mozzatron, sent you a PM
    2007 Audi RS4 with: APR ECU Upgrade; JHM Quick Shifter; Milltek Catback and Downpipes; KW V3 Coilovers; Argon Creative Carbon Fibre Splitters

  8. #8
    Join Date
    Dec 2013
    Location
    Sydney
    Posts
    57
    Thread Starter
    Cheers Gareth just replied


    Quote Originally Posted by gareth_oau View Post
    mozzatron, sent you a PM

  9. #9
    Join Date
    Dec 2013
    Location
    Sydney
    Posts
    57
    Thread Starter
    Cheers for the info Hawk & h100vw

  10. #10
    Join Date
    Apr 2013
    Location
    Adelaide, SA
    Posts
    360
    Users Country Flag

    Orange Tuning in Germany might be worth a try. I found its price quite a bit cheaper than my UK quotes probably because it uses DHL for shipping. Cat back for my Polo was 639 euros delivered mid last year when our AU dollar was very healthy. You will not see the Milltek mentioned on the web site but ask Frank for a price.

    Only problem will be that it will take 4 weeks for delivery! and the prices you have been quoted from the UK look very good.
    2015 Polo GTI with DA pack : Milltek Turbo back exhaust | DD spacer | JB1 | VWR Turbo Intake elbow and intake hose | BMC panel filter | KW Street Comfort coilovers | Whiteline adjust. endlinks | Harding DSG Perf. tune | Wagner Intercooler| Dotz Mugello 17 x 8 32ET

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |