DSG tuning in perth...

**jubei** · 28-04-2013, 07:08 PM

hi all, currently sitting on stage 3 bluefin tune (2010 golf r). will be upgrading to gtx turbo in two months (same as apr stage 3, but not apr). Im starting to get a little worried about finding a vendor in perth who can flash my dsg, so it will handle the increased torque. from the multiple discussions on the forums.. its limited to 350nm???

im very surprised at the lack of vendors in perth.. seems like their all sitting in nsw?!

can someone please suggest any options? (i dont want to ship my mechatronic off, its my daily driver after all)

**Tuning Dynamics** · 29-04-2013, 07:44 AM

Dave at RPW can do it

**Guy_H** · 29-04-2013, 11:10 AM

Quattro Motors in Burwood do our DSG software (And have done quite a few)

DQ 250

Quattro Motors
135 Burswood Road Victoria Park
WA 6100
[t] 08 9361 7111
[f] 08 9361 1952
[e] quattro@quattro.net.au

**jubei** · 29-04-2013, 11:28 AM

thanks ill give them a call

**jubei** · 29-04-2013, 11:58 AM

Originally Posted by ATPG

Dave at RPW can do it

cool thanks ill give them a call too

**parso_rex** · 29-04-2013, 10:23 PM

CPC here in Sydney do an excellent job I have to say and they may do trips over your way as I know they regularly do so on the east coast.
In particular as you are going to be using the GT28xxGTX beasty you will most likely need to alter all of the Shift points as well as the launch RPM and so on and they can do this to whatever you desire. Perhaps the others can now though
A Totally altered and street usable D mode is also worth it on its own.

**Guy_H** · 30-04-2013, 09:22 AM

All of our big turbo Golf R's, GTI's & Scirocco's get altered big turbo DSG software. Shift points is only one of a dozen variables changed for BT. Clamp force at torque onset is probably the most important.

**Lonewolf1983** · 01-05-2013, 02:46 AM

Originally Posted by jubei

cool thanks ill give them a call too

dont.
trust me

**jubei** · 05-05-2013, 10:23 AM

Originally Posted by Lonewolf1983

dont.
trust me

haha ok

**jubei** · 05-05-2013, 10:29 AM

Originally Posted by parso_rex

CPC here in Sydney do an excellent job I have to say and they may do trips over your way as I know they regularly do so on the east coast.
In particular as you are going to be using the GT28xxGTX beasty you will most likely need to alter all of the Shift points as well as the launch RPM and so on and they can do this to whatever you desire. Perhaps the others can now though
A Totally altered and street usable D mode is also worth it on its own.

is this similar to the hpa stage 3 dsg tune? thats the route ive considered.