genebaby What changes can be done to the DRLs/Indicators on a mk7.5 with LED headlight fittings? Not much - I suspect!
Almost certainly, your can will have Light Control Modules (LCMs) @ address hex29 and hex39 - and the car probably has a further 2 x LCMs @ address hexD6 and hexD7.
This means that the traditional approach where the BCM (@ hex09) is used to control the headlight fittings doesn't happen on your car - instead the LCMs take-over these functions and LCM channel maps that Ive seen have no adaptation channels and no long-code strings, So not much can be changed, alas!
Incidentally, even if your MY20 GTI did use the BCM to control the headlight fitting lamps - I suspect that you still couldn't achieve the dynamic turn-signal effect in the video; this lighting effect normally uses LED chaser circuits that are fitted inside the headlight assemblies. I doubt that your OEM fittings have this additional electronic equipment.
Don
Please don't PM to ask questions about coding, or vehicle repairs. The better place to deal with these matters is on-line, in the forum proper. That way you get the benefit of the expertise of the wider forum! Thank you.
Bookmarks