VCDS (VAG-COM) codes and programmable options for Golf Mk7

[rosslm]

Golf R Mk 7.5 has the Driver Assistance Package. Using OBDeleven I noticed Pedestrian Assist is not enabled any thoughts welcome car built June 17 first of the Wolfsburgs. If someone can check a later build to see if it's activated?

[sharp]

AFAIK Pedestrian Assist is only included in MY18.5 cars (built in/after November 2017).

[rosslm]

AFAIK Pedestrian Assist is only included in MY18.5 cars (built in/after November 2017).

Thanks for the update, guess it's got some extra hardware and software not a big one just curious

[Sage]

wow - what an amazing thread some very talented individuals here. though i have a request if someone would like a challenge.. Anyone seen a setting which will allow the USB Port for the Discovery to stay powered when engine is off? (mk7 Golf) I think it stays on for about 10 minutes once the engine is off though i want it on permanently or at least for a couple of hours.. anyone seen a setting?

(Ps. I already did the fuse change for the cigarette lighter!)

Thanks all.

[ahsee]

Hi all, I've recently bought a brand new MK7.5 comfortline with DAP and I wanted to implement the 5 brake light mod.
I have tried 2 methods (this and that) so far without any luck and I was hoping someone could help me out.
My golf has the standard LED tail lights.
Below are some screenshots of the current settings in OBD eleven.
Thanks for all your hard work guys.

[Blackpaladin67]

This drives me nuts as well.

Mine just stopped doing this after the latest factory software update it was very annoying !


Sent from my iPhone using Tapatalk

[DV52]

ashee/Blackpaladin67:

I don't have access to a mk7.5 at the moment, but just from a theoretical perspective, you might try the following

Leuchte24SL HRA65	Existing Setting	New Setting
Lasttyp 24	43-allgemeine LED	34 - LED Bremsleuchten
Lampendefektbitposition 24	1A	1A
Fehlerort mittleres Byte DTC-DFCC 24	2A	2A
Lichtfunktion A 24	Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)	Brake light/Bremslicht
Lichtfunktion B 24	Parklicht rechts	not active
Dimmwert AB 24	127	100
Lichtansteuerung HD AB 24	Always	Always
Lichtfunktion C 24	not active	Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion D 24	not active	Parklicht rechts
Dimmwert CD 24	0	10
Dimming Direction CD 24	maximize	maximize
Lichtfunktion E 24	not active	not active
Lichtfunktion F 24	not active	not active
Dimmwert EF 24	0	0
Dimming Direction EF 24	maximize	maximize
Lichtfunktion G 24	not active	not active
Lichtfunktion H 24	not active	not active
Dimmwert GH 24	0	0
Dimming Direction GH 24	maximize	maximize
Leuchte23SL HLC10	Existing Setting	New Setting
Lasttyp 23	43-allgemeine LED	34 - LED Bremsleuchten
Lampendefektbitposition 23	A	A
Fehlerort mittleres Byte DTC-DFCC 23	29	29
Lichtfunktion A 23	Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)	Brake light/Bremslicht
Lichtfunktion B 23	Parklicht links (beidseitiges Parklicht aktiviert li & re)	not active
Dimmwert AB 23	127	100
Lichtansteuerung HD AB 23	Always	Always
Lichtfunktion C 23	not active	Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion D 23	not active	Parklicht links (beidseitiges Parklicht aktiviert li & re)
Dimmwert CD 23	0	50? (choose a value to suit)
Dimming Direction CD 23	maximize	maximize
Lichtfunktion E 23	not active	not active
Lichtfunktion F 23	not active	not active
Dimmwert EF 23	0	0
Dimming Direction EF 23	maximize	maximize
Lichtfunktion G 23	not active	not active
Lichtfunktion H 23	not active	not active
Dimmwert GH 23	0	0
Dimming Direction GH 23	maximize	maximize

Please note that I have suggested that you reset the illumination level for Dimmwert CD on both Leuchte to a new value. Just from sitting here thinking about the change, it seems that you need a different illumination level between the Brake light function and the Parking light function - else the driver at the rear won't be able to easily distinguish from the inner lights when you are braking (hope this makes sense).

Anyhow try the above suggestion first. If my table above doesn't work - the other way that you might try is to simply copy the settings from the 2 x Brake lights onto the 2 x Leuchte-sets above (of course without changing Lampendefektbitposition or Fehlerort mittleres Byte DTC-DFCC channels )

Don

[Blackpaladin67]

ashee/Blackpaladin67:

I don't have access to a mk7.5 at the moment, but just from a theoretical perspective, you might try the following

Leuchte24SL HRA65	Existing Setting	New Setting
Lasttyp 24	43-allgemeine LED	34 - LED Bremsleuchten
Lampendefektbitposition 24	1A	1A
Fehlerort mittleres Byte DTC-DFCC 24	2A	2A
Lichtfunktion A 24	Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)	Brake light/Bremslicht
Lichtfunktion B 24	Parklicht rechts	not active
Dimmwert AB 24	127	100
Lichtansteuerung HD AB 24	Always	Always
Lichtfunktion C 24	not active	Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion D 24	not active	Parklicht rechts
Dimmwert CD 24	0	10
Dimming Direction CD 24	maximize	maximize
Lichtfunktion E 24	not active	not active
Lichtfunktion F 24	not active	not active
Dimmwert EF 24	0	0
Dimming Direction EF 24	maximize	maximize
Lichtfunktion G 24	not active	not active
Lichtfunktion H 24	not active	not active
Dimmwert GH 24	0	0
Dimming Direction GH 24	maximize	maximize
Leuchte23SL HLC10	Existing Setting	New Setting
Lasttyp 23	43-allgemeine LED	34 - LED Bremsleuchten
Lampendefektbitposition 23	A	A
Fehlerort mittleres Byte DTC-DFCC 23	29	29
Lichtfunktion A 23	Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)	Brake light/Bremslicht
Lichtfunktion B 23	Parklicht links (beidseitiges Parklicht aktiviert li & re)	not active
Dimmwert AB 23	127	100
Lichtansteuerung HD AB 23	Always	Always
Lichtfunktion C 23	not active	Standlicht allgemein (Schlusslicht; Positionslicht; Begrenzungslicht)
Lichtfunktion D 23	not active	Parklicht links (beidseitiges Parklicht aktiviert li & re)
Dimmwert CD 23	0	50? (choose a value to suit)
Dimming Direction CD 23	maximize	maximize
Lichtfunktion E 23	not active	not active
Lichtfunktion F 23	not active	not active
Dimmwert EF 23	0	0
Dimming Direction EF 23	maximize	maximize
Lichtfunktion G 23	not active	not active
Lichtfunktion H 23	not active	not active
Dimmwert GH 23	0	0
Dimming Direction GH 23	maximize	maximize

Please note that I have suggested that you reset the illumination level for Dimmwert CD on both Leuchte to a new value. Just from sitting here thinking about the change, it seems that you need a different illumination level between the Brake light function and the Parking light function - else the driver at the rear won't be able to easily distinguish from the inner lights when you are braking (hope this makes sense).

Anyhow try the above suggestion first. If my table above doesn't work - the other way that you might try is to simply copy the settings from the 2 x Brake lights onto the 2 x Leuchte-sets above (of course without changing Lampendefektbitposition or Fehlerort mittleres Byte DTC-DFCC channels )

Don

Thanks Don



Sent from my iPhone using Tapatalk

[Rooboy]

Automatically adjusting the time and date for daylight savings time has just come up in this thread for cars with MIBII. It should also automatically adjust the time on interstate trips. Daylight Saving Time ?

Make sure you have the time reading off GPS in the settings.

[ahsee]

Thanks a lot Don, I'll try out your suggestions when I get home on Friday night.