VCDS (VAG-COM) codes and programmable options for Golf Mk7

[DV52]

See screenshot. I've got a MY17 GTI hatch.


Sent from my iPhone using Tapatalk

Jimmyjames: OK "Golf Variant" works for me - it looks like this:


Kind-of looks like the "station wagon" on your first post. If you check the Codinglog.CSV file that lives in the Ross-Tech/Debug directory on the laptop that you used to make changes, you should see a record of when the change to the code-string was made to the car. Just look for records that have Address 5F in the first column.

Anyway, try changing the value of these Bytes to 027300 - as per my screenshot

Don

[gaucho]

is it possible to set the "CAR" page of the infotainment screen to always begin in the 'SINCE START' page (i.e., not in the vehicle status page) ??

[jimmyjamesred]

Jimmyjames: OK "Golf Variant" works for me - it looks like this:


Kind-of looks like the "station wagon" on your first post. If you check the Codinglog.CSV file that lives in the Ross-Tech/Debug directory on the laptop that you used to make changes, you should see a record of when the change to the code-string was made to the car. Just look for records that have Address 5F in the first column.

Anyway, try changing the value of these Bytes to 027300 - as per my screenshot

Don

Awesome thanks for that. I think I worked out what I did. I used the long coding helper to deactivate the safety warning.

I think as I was arrowing down through the bytes I must have inadvertently scrolled through the drop downs to select the Variant in the first byte. Anyway I copied the original coding from the log and then changed the 2 to a 0 to disable the warning again. Voila, I have a GTI hatch again on the screen. Cheers!


Sent from my iPhone using Tapatalk

[gaucho]

is it possible to set the "CAR" page of the infotainment screen to always begin in the 'SINCE START' page (i.e., not in the vehicle status page) ??

Anyone with experience in this?

[Reedy]

My Vehicle status only shows up first when there is a message such as door open or fuel needed, otherwise what comes up first is what I last left it on.


Sent from my iPhone using Tapatalk

[gaucho]

My Vehicle status only shows up first when there is a message such as door open or fuel needed, otherwise what comes up first is what I last left it on.


Sent from my iPhone using Tapatalk

that's exactly how I would like it to do, but here it always come to the Status screen. Is it possible to fix?

[agentthumb]

that's exactly how I would like it to do, but here it always come to the Status screen. Is it possible to fix?

Try this:

Before you power on the car, close all your car doors first. It should just go to the last page.

Door open, low fuel, service reminder or any other warning will hijack your screen.

I agree tho, it's nice that it tells me my door is open, but it should return to the original screen once I have closed my door, and there are no other statuses to show...


Sent from my iPhone using Tapatalk

[LunchboxVRS]

I leave mine on oil temp but If you make a call, put in a address to Nav to it will change to that until you switch it back. It's just what it does.

[gaucho]

Try this:

Before you power on the car, close all your car doors first. It should just go to the last page.

Door open, low fuel, service reminder or any other warning will hijack your screen.

I agree tho, it's nice that it tells me my door is open, but it should return to the original screen once I have closed my door, and there are no other statuses to show...


Sent from my iPhone using Tapatalk

Here even with no warnings it goes back to Status, is there any vcds config to change that? Doors open I can see in the driver's panel, no need to see it in the central panel screen.

[agentthumb]

Here even with no warnings it goes back to Status, is there any vcds config to change that? Doors open I can see in the driver's panel, no need to see it in the central panel screen.

I don't believe so. Others might know tho.


Sent from my iPhone using Tapatalk