Soundaktor

**JDM_VW** · 15-05-2014, 08:40 AM

I've just coded one for a customer down to 60% and sounds much better (on a Mk7 R)

**andrew7** · 15-05-2014, 11:36 AM

^ JDM, would you be able to share the coding required? I would like to have my dealer adjust my Mk7 R but this will be a first for them so much easier if I go to them and say "this is what you need to do, 5 minute job". Cheers

**andrew7** · 15-05-2014, 02:34 PM

OK, here it is (courtesy of Golf mk7 FORUM):

Go to:

- A9 Struct. Borne Sound
- Adapation 10
- Select "channel of structure borne sound " (only choice)
- Std value 100% - change to the value you want stored in % (60% has been suggested as a good happy medium, adjust to 0% if you want no noise/mini vibrations).
- "Use change code for change approval" (not sure what this means??)

Now to find someone with a VCDS cable or trudge back to the dealer...

**JDM_VW** · 15-05-2014, 02:35 PM

Originally Posted by andrew7

^ JDM, would you be able to share the coding required? I would like to have my dealer adjust my Mk7 R but this will be a first for them so much easier if I go to them and say "this is what you need to do, 5 minute job". Cheers

Haha yeah thats ok, its a really simple job, they can scan the vehicle and go to the borne sound control module (called -J869-) and in there they can code the volume as a percentage, 60% works good at that but its upto you what level youd prefer

**JDM_VW** · 15-05-2014, 02:47 PM

Originally Posted by andrew7

OK, here it is (courtesy of Golf mk7 FORUM):

Go to:

- A9 Struct. Borne Sound
- Adapation 10
- Select "channel of structure borne sound " (only choice)
- Std value 100% - change to the value you want stored in % (60% has been suggested as a good happy medium, adjust to 0% if you want no noise/mini vibrations).
- "Use change code for change approval" (not sure what this means??)

Now to find someone with a VCDS cable or trudge back to the dealer...

If you're near Rockdale (NSW) i can do it for you

**RoccoR** · 26-05-2014, 06:01 PM

Anyone in Melbourne with VCDS and micro CAN who can assist with a simple coding of the soundaktor synthesised engine noise for Golf R mk7? Would really appreciate it. I have the instructions so should be pretty simple.

Sent from my iPhone using Tapatalk

**mr gee** · 26-05-2014, 09:34 PM

I have Micro-can. SE suburbs

PM me

**Snail Style** · 27-05-2014, 05:56 AM

I'm out west, so if you want to get stabbed and have a few other things switched on then just drop me a PM. Only thing I haven't gotten to work so far was the XDL adaption in the brake electronics.