Rear traffic alert visual warning?

**agentthumb** · 12-09-2016, 01:18 PM

Originally Posted by Barracuda

Perfecto! Thanks Matey!

No problemo. Glad I could be of some help too

**sillygogo** · 12-09-2016, 07:36 PM

Rear traffic alert, will beeps at you when are vehicle or people approaching your path when reversing. Few months ago, reversing out of our driveway. The vehicle was rolling down the drive way while I was closing the garage door with the remote. We still have about 3 meters to the road, a car is approaching, the system beeps, i didn't car much as we are still about few meters from the road. The system brakes and beeps. I am not sure how sensitive or at what speed that the system will brakes.

**agentthumb** · 12-09-2016, 07:41 PM

Have you got a MY16 golf?

If so, can you post your part number for ABS, BCM and Lane assist or side assist from vcds scan?

Sent from my iPhone using Tapatalk

**sillygogo** · 12-09-2016, 07:48 PM

Originally Posted by agentthumb

Have you got a MY16 golf?

If so, can you post your part number for ABS, BCM and Lane assist or side assist from vcds scan?

Sent from my iPhone using Tapatalk

Mine is the my15.5 and i don' have access to a VCDS thingy

**agentthumb** · 12-09-2016, 07:48 PM

Ahh, same as mine then. So it does brake

Sent from my iPhone using Tapatalk

**XaGiCo** · 12-09-2016, 08:00 PM

Coding & Adaptation Blid Spot Assist / Side Assist with Rear Traffic Alert!

I hope my explanation google translate well.
I have Mib 1 and my fis 2014.

Acoustically Rear Traffic Alert me to run many times, get to STOP and NOTIFICATION on FIS only once.

Regards

**agentthumb** · 12-09-2016, 08:19 PM

Thanks XaGiCo, I went through your instructions in great details yesterday and everything seems to match out of factory however, my parking assistance displays differently to yours. I suspect it's because you are running MIB1 PRO, where as mine is only MIB1 Discover Media. I don't get the extra blind spot display in my parking sensor displays.

Nothing in the configuration seems to suggest the car would actually stop automatically, and while i've had the alert tone many time, never got into a situation where it needed to brake for me. Hence I wasn't sure if it was actually going to do it.

**sillygogo** · 12-09-2016, 08:23 PM

Originally Posted by agentthumb

Ahh, same as mine then. So it does brake

Sent from my iPhone using Tapatalk

on that occasion it did. However, i tried to replicated in a shopping center while getting out of the carpark and it didn't. I don't really know the parameters. Best to use your own judgement, the system's automate is there as a backup and not the other way around.

**agentthumb** · 12-09-2016, 08:31 PM

Originally Posted by sillygogo

on that occasion it did. However, i tried to replicated in a shopping center while getting out of the carpark and it didn't. I don't really know the parameters. Best to use your own judgement, the system's automate is there as a backup and not the other way around.

Haha, yes, never plan on using it. But it's comforting knowing it is there to catch you

**XaGiCo** · 12-09-2016, 08:38 PM

Originally Posted by agentthumb

Thanks XaGiCo, I went through your instructions in great details yesterday and everything seems to match out of factory however, my parking assistance displays differently to yours. I suspect it's because you are running MIB1 PRO, where as mine is only MIB1 Discover Media. I don't get the extra blind spot display in my parking sensor displays.

Nothing in the configuration seems to suggest the car would actually stop automatically, and while i've had the alert tone many time, never got into a situation where it needed to brake for me. Hence I wasn't sure if it was actually going to do it.

You're welcome!

MIB 1 not supported display Read Traffic Alert and either disable the option audible warning.