Post speed sign in active display GTi 7.5

**nibose** · 03-09-2019, 10:56 AM

Originally Posted by Hillbilly

Well there is the problem as we have been talking about using OBDeleven and now you say you are using something else

Also as the thread is about TSR I will comment not further about lights as its well off topic

Agreed, I brought this up because you'd mentioned about DLA.

Originally Posted by nibose

Dropbox - Audi Traffic Sign Recognition Retrofit Guide rev1.pdf - Simplify your life

I just came across this link which gives information on TSR on Audi with Fusion mode. Has anybody tried these steps?

Any thoughts on this?

**Hillbilly** · 03-09-2019, 11:11 AM

Originally Posted by nibose

Agreed, I brought this up because you'd mentioned about DLA.

Any thoughts on this?

Which was only in relation to a reply to trying to sort out a perceived problem with the TSR and NO

**dArK5HaD0w** · 03-09-2019, 11:33 AM

Originally Posted by nibose

Dropbox - Audi Traffic Sign Recognition Retrofit Guide rev1.pdf - Simplify your life

I just came across this link which gives information on TSR on Audi with Fusion mode. Has anybody tried these steps?

Audi uses an MMI navigation/infotainment system, which is different to MIB systems found in VW/Skoda/Seat.
as a result, they use different maps.
i also believe they even have a different variation to the MQB platform used by VW/Skoda/Seat.
as a result, they have different control modules and labels to their systems.

**Hillbilly** · 04-09-2019, 09:48 AM

Originally Posted by DV52

As OP has said 14117 is the security code for the hex13 module.

If you, or anyone else needs further security codes, I've posted a table on the Ross-Tech forum HERE

Hope the table is of use - but more importantly (and my reason for replying) - if anyone knows security codes that aren't on the table (and that have been confirmed as working), please let me know - so I can add to the table.

I promise to include attribution if advised.

Don

Doesnt work for me and I cant access the Rosstech forum 20103 worked several times so either Im different or the 14117 is incorrect

**DV52** · 04-09-2019, 10:18 AM

Thanks-

**genebaby** · 27-07-2020, 06:10 PM

Hi guys. I've read this thread a few times and I am good with making the changes in Adaptations but when I select Long Coding with my OBD11, it's a V2, I can't see the bits and bytes part.

Any ideas?