MK 7.5 Golf Traffic enablement

[dec76]

Hello All,

Havent been able to get the traffic to enable(show) on my new MY18 7.5 Highline. The coding is accepted and the channel is set to 1024 as needed, but isnt working.

Has anyone been able to get this working on a late build model? Mine is Built 10/17
Both RDS and TP program are enabled and showing on the top of the screen, radio has been left to sit for time also.

Have enabled traffic in many MQB based cars including 7/17 built 7.5 Golf also.

Only thing that isnt coded and is annoying!!!1 Please let me know

Thanks

Heath

[AndrewEsno]

Hello All,

Havent been able to get the traffic to enable(show) on my new MY18 7.5 Highline. The coding is accepted and the channel is set to 1024 as needed, but isnt working.

Has anyone been able to get this working on a late build model? Mine is Built 10/17
Both RDS and TP program are enabled and showing on the top of the screen, radio has been left to sit for time also.

Have enabled traffic in many MQB based cars including 7/17 built 7.5 Golf also.

Only thing that isnt coded and is annoying!!!1 Please let me know

Thanks

Heath

Are you doing his through OBDeleven?

I want to do the same thing but the codes I have looked at haven’t worked for me either



Sent from my iPhone using Tapatalk

[DV52]

^^^^Andrew: just as a suggestion, after you have entered 1024, make sure that you have the highlighted software switches set as per the picture below.



Then do a complete reset of the MIB unit- with the radio switched-on, press and keep holding-down the ON/OFF knob until the MIB turns off, then turns on again. Then press the TRAFFIC button

Don

[rosslm]

^^^^Andrew: just as a suggestion, after you have entered 1024, make sure that you have the highlighted software switches set as per the picture below.



Then do a complete reset of the MIB unit- with the radio switched-on, press and keep holding-down the ON/OFF knob until the MIB turns off, then turns on again. Then press the TRAFFIC button

Don

I can confirm the above setting does activate Traffic Information

[dec76]

I can confirm the above setting does activate Traffic Information

Hi Rossim,

What biuld is yours as mine is MY18 Built 10/17.

I have followed the above but either OBD11 and VCDS will not allow me to code the BYTE 13 RDS NOT DEACTIVATED. Mine is deactivated, but RDS TEXT PLus is activated!!

Anyone with any ideas??

[rosslm]

Hi Rossim,

What biuld is yours as mine is MY18 Built 10/17.

I have followed the above but either OBD11 and VCDS will not allow me to code the BYTE 13 RDS NOT DEACTIVATED. Mine is deactivated, but RDS TEXT PLus is activated!!

Anyone with any ideas??

dec76

Mine was built 06/17 my OBD11 allowed me to edit BYTE 13 RDS and Radio_Text_Plus did you set 1024 first also is RDS on in your MDF setup?

[dec76]

dec76

Mine was built 06/17 my OBD11 allowed me to edit BYTE 13 RDS and Radio_Text_Plus did you set 1024 first also is RDS on in your MDF setup?

Hi Rossim,

I have followed all the ways to do it!! RDS enabled and TP enabled in Discover H/U. OBD11 wont change the BYTE 13 RDS and Radio_text_plus saying not allowed!!!

have done quite a few of these MQB cars and this has me stumper!!

Are you in Brisbane? if so maybe we can catch up and compare notes

Thanks in advance

Heath

[AndrewEsno]

^^^^Andrew: just as a suggestion, after you have entered 1024, make sure that you have the highlighted software switches set as per the picture below.



Then do a complete reset of the MIB unit- with the radio switched-on, press and keep holding-down the ON/OFF knob until the MIB turns off, then turns on again. Then press the TRAFFIC button

Don

Which coding did you actually use to get it done through OBD Eleven.

[DV52]

^^^^ here's the VCDS screen equivalent (using the "yellow" long coding helper screen from the latest SW version)



So, set Byte 13, Bit0 & Bit3
Don

[AndrewEsno]

^^^^ here's the VCDS screen equivalent (using the "yellow" long coding helper screen from the latest SW version)



So, set Byte 13, Bit0 & Bit3
Don

Thanks for your help got it done and working