Group Buy: Aftermarket Bixenon Headlights (WinPower Lamps)

[point]

I've got a mate who's helping me install them this arvo so I should be set - where did you guys attach the ballasts?

[Tomatoes]

I've got a mate who's helping me install them this arvo so I should be set - where did you guys attach the ballasts?

Underneath the headlight. There should be a little platform with screw holes, but it's not a clean fit, you might need to put the screw in at an angle.

[point]

how'd you guys reach the two upside down screws on the sides of the bumper?

[mui_michael]

10mm ratchet with or without extension mate.

[mui_michael]

These two right?

[point]

yep those two, im up **** creek as one's no longer gripping the 10mm ratchet

im thinking of getting a 9mm and trying?

[mui_michael]

Try a pair of pliers?

[mui_michael]

If worst comes to worst, just use a Stanley knife to cut it as the two bolts are just plastic.

[point]

okay ive got the left hand side light it, i tried it out but the bean is insanely low - it reaches at max 1 metre away from the car and it's not above the bonnet line when stationary - the stock halogen on the right is a lot brighter - anyone know what could be up?

[mui_michael]

Use this for height adjustment:


And for brightness, mine is perfect but I've noticed that the plug needs to be push in very hard. The first time I pushed in, it didn't work...