Burger Motorsports JB1 Tuning Module + Cable

[Jordn]

Ordered! Got the OBDEleven Pro as well for more programming fun.

FYI i can run torque / racingmeter and even the jb4 app on my mib2 screen. Its pretty easy to setup. With the jb4 app i can start logging as well as change maps on the fly!

Also super interested in how to do this ^^

[Mattlock]

What-what-what?? More info and/or links please!

Absolutely. Spill the beans please.


Sent from my iPhone using Tapatalk

[kyratz]

I'm in too - golf gti 40th- JB1 + cable

[monkeysrus]

Ok, a little bit of background on getting this working. First up you need a mib2 with mirrorlink – therefore you have to have an android phone. I don’t know how this can be done with an iphone.

For torque you need a have an elm327 bluetooth adapter (can be had cheap on ebay). To get the app on screen you use mirrorlink and then enter google maps, once up hit the home button and this will bring up your phone screen – you can then open up the torque app. The one extra trick is to enable video while in motion, you need obd11 for this. There is an app within obd11 to enable video in motion and you need to select the mirrorlink option when you enable this. That’s basically it. If you are running a jb1 the boost will be the ecu value, not jb value.

For jb4 app you need to have the jb4 bluetooth module that is a replacement for the cable. (and a lot more expensive) Otherwise it’s the same, get to home screen and boot up the app. Once up you can view gauges, log, change maps & setting etc. The only trick with this is to ensure you disconnect the jb app before you shut off the car, mine does weird stuff if I don’t.

This is all going to look extra nice when I swap my screen to the 8” next week!

[Bronco]

Count me in! MK7 Golf R - JB1 + cable

[inso]

Ordered this evening - thanks

[urxtream]

Golf_7R
Zippythelown
Shengg
CandE
Sawbones

The people listed above have not made their orders, therefore, their codes will be released to the people next in line. I'm sorry!

[ringo]

Ok, a little bit of background on getting this working. First up you need a mib2 with mirrorlink – therefore you have to have an android phone. I don’t know how this can be done with an iphone.

For torque you need a have an elm327 bluetooth adapter (can be had cheap on ebay). To get the app on screen you use mirrorlink and then enter google maps, once up hit the home button and this will bring up your phone screen – you can then open up the torque app. The one extra trick is to enable video while in motion, you need obd11 for this. There is an app within obd11 to enable video in motion and you need to select the mirrorlink option when you enable this. That’s basically it. If you are running a jb1 the boost will be the ecu value, not jb value.

For jb4 app you need to have the jb4 bluetooth module that is a replacement for the cable. (and a lot more expensive) Otherwise it’s the same, get to home screen and boot up the app. Once up you can view gauges, log, change maps & setting etc. The only trick with this is to ensure you disconnect the jb app before you shut off the car, mine does weird stuff if I don’t.

This is all going to look extra nice when I swap my screen to the 8” next week!

I see. I got almost all peripherals (elm327 BT, OBD11, android) but the stupid Nexus phones don't allow for mirror-link i think, just android auto. Can find another phone to try though.

Thanks for the nice instructions!

[Stephan]

I just ordered and paid for mine.

Thanks again for organising this, timing couldn't have been better.

[Danoman]

+1 for me - MK7 Golf GTI. JB1 + Cable! Thanks


Sent from my iPhone using Tapatalk