Forge quick shift fits 9N3 GTI, some MK4 chassis and some MK5 and 6, 6 speed manuals.

[Bullet Fast]

dunno. I was pretty keen on the diesel geek one up until now have you tried both and recommendation? my gearbox is starting to feel a little loose on (bit of left right movement when its in gear) was going to see if a short shift would help a bit and a bit of an upgrade while I'm there.

I've just played this game, some movement should be expected, but you can order the plastic bush/sleeves that tighten all that up pretty cheaply either locally through vw, online at ECS et al. I think one of the other forum members had a 'floppy knob' kit for sale in the classifieds recently that might work. I found between a couple of new plastic bits and the forge lever things tightened up enough I stopped caring mostly. Just be aware the tighter you go, the more precise you'll need to be with the shifts.

And while I'm thinking about it, Gav my plastic printed shift bushes are still going hard!

[h100vw]

I've just played this game, some movement should be expected, but you can order the plastic bush/sleeves that tighten all that up pretty cheaply either locally through vw, online at ECS et al. I think one of the other forum members had a 'floppy knob' kit for sale in the classifieds recently that might work. I found between a couple of new plastic bits and the forge lever things tightened up enough I stopped caring mostly. Just be aware the tighter you go, the more precise you'll need to be with the shifts.

And while I'm thinking about it, Gav my plastic printed shift bushes are still going hard!

Glad to hear the bushes are hard