Support VWWC

Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: turbo rattle

  1. #1
    Join Date
    Sep 2007
    Location
    perth western australia
    Posts
    419

    turbo rattle

    at the moment im getting the a4 b5 qt serviced , also the turbo needs attention as well it has started to make tinny noise when deselerating ! , the turbo has been taken to turbo tech ,
    Has anyone had this problem before ? if i need to replace it what is a good turbo to fit for a replacment , shane

  2. #2
    Join Date
    Dec 2008
    Location
    Northern Suburbs
    Posts
    154
    the wastegate begins to rattle on k03's as they get older, depending on what you want to spend a k04 can be a nice upgrade but no gain in power will be seen without maf, injectors & software

    http://www.eurospeed.net.au/index.ph...roducts_id=185

  3. #3
    might be time for a new turbo

  4. #4
    Join Date
    Sep 2007
    Location
    perth western australia
    Posts
    419
    Thread Starter
    want to sell the audi so yes will be replacing the turbo for a genuine one , if it can be found locally ?

  5. #5
    Join Date
    Dec 2009
    Location
    Cleveland, OH
    Posts
    52
    Users Country Flag
    New/used Ko3's are not costly. If you are planning on selling the car I would just go with a stock turbo, no need for a ko4.

    I know we aren't local, but for pricing ideas - this is what you are looking for.
    :: www.ECStuning.com :: IS NOW OPEN TILL MIDNIGHT EST FOR PHONE ORDERS!!

    Phone: 1.800.924.5172 - 8:30 am to 12:00 am | Email: Pete@ecstuning.com | Questions? PM us for a quick response!

  6. #6
    Join Date
    Sep 2007
    Location
    perth western australia
    Posts
    419
    Thread Starter
    got a new turbo fitted , stock ko3 , well its made a huge difference too , i can actually here it working , the old one was stuffed it had cracks in the housing .

  7. #7
    Join Date
    Jan 2009
    Location
    blankedy
    Posts
    4,058
    What sort of Kms? Was the car modified?

  8. #8
    Join Date
    Sep 2007
    Location
    perth western australia
    Posts
    419
    Thread Starter
    its done 181000klm just got a reciete for the work done from golfwagen , over a thousand dollers spent, the audi hasnt been modified
    Last edited by dubsweeper; 24-01-2010 at 11:23 AM.

  9. #9
    Join Date
    Aug 2007
    Location
    Dont poke and hope, scan, smoke and scope
    Posts
    4,423
    Users Country Flag
    Got pics of the turb mate????? Seen a couple cracked, and at the same time found the oil pipe sludged to the max, obviously overheating and not lubricating properly. Did you clean out your oil pipes???? common thing on the 20VT. Lots of heat from the Turbo and manifold baking the sludge and carbon in the pipes.
    Cheers
    Jmac
    Alba European
    Service, Diagnostics and repairs. Mobile Diag available on request
    Audi/VW/Porsche Factory trained tech 25+ yrs exp
    For people who value experience call 0423965341

  10. #10
    Join Date
    Sep 2007
    Location
    perth western australia
    Posts
    419
    Thread Starter

    cracks

    yeah got some pics i just took !will post them up shortly

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |