Results 1 to 8 of 8

Thread: Turbo Intake Pipe

  1. #1
    Join Date
    Nov 2014
    Location
    NSW
    Posts
    5

    Turbo Intake Pipe

    Hey all. im fairly new here.
    I have recently acquired my "new" 2002 S3 225BHP with BAM with ESP. The person i bought it off gave me a great deal because the hoses need changing but everything else is great.

    My first question is, the the hose that connects to the TIP from the PVC has blown off and broken. Is this somthing that i should replace? Will this affect my performance or life of the car? To fix this i will need a new intake. If a new TIP is something i need, The OEM one will cost me around $700 which is way out of my budget. Thus i was looking at the Badger5 V2.2.
    IS there anyone here selling a second hand Badger5 80mm TIP that is in relatively good nic?

    Thanks guys. I hope this makes sense.

    Dan
    Last edited by danc; 19-11-2014 at 11:45 AM. Reason: more info

  2. #2
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,979
    Users Country Flag
    Quote Originally Posted by danc View Post
    Hey all. im fairly new here.
    I have recently acquired my "new" 2002 S3 225BHP with BAM with ESP. The person i bought it off gave me a great deal because the hoses need changing but everything else is great.

    My first question is, the the hose that connects to the TIP from the PVC has blown off and broken. Is this somthing that i should replace? Will this affect my performance or life of the car? To fix this i will need a new intake. If a new TIP is something i need, The OEM one will cost me around $700 which is way out of my budget. Thus i was looking at the Badger5 V2.2.
    IS there anyone here selling a second hand Badger5 80mm TIP that is in relatively good nic?

    Thanks guys. I hope this makes sense.

    Dan
    Going to be tough finding a secondhand one in Australia.

    Post a picture of the tip and the damaged pipework. You don't want it to be able to ingest un-metered air. I'd say go to ebay and buy a new tip off Bill direct.

    Gavin

  3. #3
    Join Date
    Nov 2014
    Location
    NSW
    Posts
    5
    Thread Starter
    The Red tape at the top is the hose from the PCV and the hole is obviosuly in the intake. I avoid driving it for that reason.
    Attached Thumbnails Attached Thumbnails Turbo Intake Pipe-10816185_10152557381499353_1520484244_n-jpg  

  4. #4
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,979
    Users Country Flag
    Block the hole in the TIP and let the PCV vent for the time being. Potentially lose some boost until it's fixed properly.

    Is there not enough left on the TIP to repair it?

    You could look at other silicon TIPs too although if you have to buy one, a Badger5 is not much extra.

    Gavin

  5. #5
    Join Date
    Nov 2014
    Location
    NSW
    Posts
    5
    Thread Starter
    Haha. Thanks Gav, ill see what i can do. I am happy to pay for it as she has been remapped aswell, the only issue is i dont think they want to ship it to Australia.

  6. #6
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,979
    Users Country Flag
    Quote Originally Posted by danc View Post
    Haha. Thanks Gav, ill see what i can do. I am happy to pay for it as she has been remapped aswell, the only issue is i dont think they want to ship it to Australia.
    If you're willing to pay shipping, it's the exact same process. Walk into post office, say I want to ship this to Australia, pay a bit more and fill in a customs sticker.

    I know he ships out of the UK, because that other TIP you were chasing is here.

    Also I see that you can buy from AwesomeGTI store. They will ship international.

    Gavin

  7. #7
    Join Date
    Nov 2014
    Location
    NSW
    Posts
    5
    Thread Starter
    Gav, your a champ. Ill just buy via AwesomeGTI.. thanks mate

  8. #8
    Join Date
    Nov 2014
    Location
    Australia
    Posts
    132
    Users Country Flag

    I've got a badger 5 TIP on mine

    Same thing happened to my car the tip and pcv disintegrated.

    Had a chat with bill first then bought off eBay. No trouble shipping to australia! I recall it was around the $500 mark. Also while I was there I replaced the pcv with forge silicone hoses. And they work really well.

    There are also some cheap silicone stuff on eBay but in my opinion you should avoid them. There are lots of people running big power on the badger 5. It's a good kit plus the intake sound is mint.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |