Omg How Much?

[franz]

Hi there guys. I drive an a4 b5 2.6Q

I brought the car to a mech friend of our family to get the clutch replaced.
after they took the gearbox and the old clutch out they saw that the flywheel was damaged. I was thinking oh no more problems.. they tried to get it machined but the shop said its double sided or something thats why it cant be machined. We called a few shops wreckers and ask if how much for the flywheel and we got quoted $3000 and 800 for the clutch kit. I wont be able to afford a new one so now i dont know what to do...

Is that the normal price for the flywheel?

[gareth_oau]

Audi parts are typically expensive.

suggest you do some online homework and consider buying ex europe or USA.

Its not the right one for your car, but the following example:
http://www.ngpracing.com/store/index...ategory_id=287

shows they are selling for around $500ish US. so your landed cost here would be circa $850ish

[TSi2NV]

I am unsure on what the price should be but that sounds a little high,
you maybe able to get one made and at engineering firm

[gpk_gti]

please update your location so we can properly advise you mate.

[franz]

im froM Blacktown NSW area. I already have the clutch kit. I just need the flywheel to go with it.

[h100vw]

Speak to Australian Clutch Services in Adelaide.

David seems to be up on Euro vehicles.

http://www.australianclutch.com.au/

I have got good prices on clutches for FWD stuff like Polos and Golfs.

Gavin

[Golf Loon]

We are in Campbelltown.
call on Monday and I`m sure we can help.

[Transporter]

Hi there guys. I drive an a4 b5 2.6Q

I brought the car to a mech friend of our family to get the clutch replaced.
after they took the gearbox and the old clutch out they saw that the flywheel was damaged. I was thinking oh no more problems.. they tried to get it machined but the shop said its double sided or something thats why it cant be machined. We called a few shops wreckers and ask if how much for the flywheel and we got quoted $3000 and 800 for the clutch kit. I wont be able to afford a new one so now i dont know what to do...

Is that the normal price for the flywheel?

It is probably the dual mass flywheel and they are expensive.
Wish you luck.

[Jmac]

I can have your dual mass machined mate if all else fails, i have an engineer up here who has made a jig specially for that. Ive had a few boxster and 996 ones done now, all good.
Let me know if you are stuck
Jmac

[franz]

Thanks guys for the support..the car is currently in the shop and just waiting for monday. Ill probably get it machined if anyone does it because buying the new one will be out of my budget.