Reply With Quotehey bud, I have vcds if you wanna give it a crack. You'll need to know how to drive the software to make the changes as I don't yet know anything beyond the real basics.Originally Posted by syhm1984
Sean
New Dubber
Just checking to see if Newcastle area has someone getting around with the bits and know-how. Nothing needed just yet, and certainly not for free, but looking to have some mods done in near future so just tracking down my guy. Cheers!
Sent from my LG-D855 using Tapatalk
Volkswagenist
hey bud, I have vcds if you wanna give it a crack. You'll need to know how to drive the software to make the changes as I don't yet know anything beyond the real basics.
Sean
Track Car: 06 Polo GTI Red Devil mkII
Daily: 2010 VW Jetta Highline
Gone but not forgotten: 08 Polo GTI
** All information I provide is probably incorrect until validated by someone else **
New Dubber
Hey All.
I'm looking to re-level my bi-xenon's as they point down too much, I guess its from new suspension. I live in Brisbane metro, hoping someone can help me out. Cheers
Will
Volkswagen Enthusiast
hey fellas I have vagcom
more then happy to help out
located south west Sydney Gregory Hills 2557
Polo GTI
T-Roc R
Tiguan R
Dubber
Anyone in Melbourne's west who could help me code automatic boot closing and traffic alert on a Columbus on an Octavia III?
Dubber
Hey Dubfree88,
Did you get your lights adjusted? I have VCDS cable and relevant software to help... PM me still need a hand.
Dubber
Hey Guys,
I'm situated in Tenerriffe, QLD (near Fortitude Valley) and own VCDS + latest software + the knowledge of how to use the software
Willing to help out with fault codes, coding of new features or getting rid of coding(VW, Audi, Skoda)...
Tim
New Dubber
Hi there looking for someone with a vcds cable north of Melbourne hoping to get some logging done on 11' Tiguan. Happy to supply beer as payment.
Volkswagen Fanatic
Check your PM - no need for beer!!
Don
Please don't PM to ask questions about coding, or vehicle repairs. The better place to deal with these matters is on-line, in the forum proper. That way you get the benefit of the expertise of the wider forum! Thank you.
New Dubber
Just curious guys can you update firmware/software for the ECU with the cable
I got the engine light coming up its "08213 , P2105, VW GOLF INTAKE MANIFOLD FLAP POSITION SENSOR FAULT IMPROBABLE "
I read somewhere that if you update the software it will fix the bugs and get rid of that reading
Last edited by abzonline; 04-09-2015 at 06:57 PM.
Posting Permissions
Bookmarks