Page 1 of 4 123 ... LastLast
Results 1 to 10 of 40

Thread: Tiguan Haldex Malfunction .. VCDS test help !

  1. #1
    Join Date
    Jun 2013
    Location
    Australia
    Posts
    639
    Users Country Flag

    Tiguan Haldex Malfunction .. VCDS test help !

    Today morning while I was driving to work I felt my steering wheel is light and have fair amount of torque steer. Also from the take off s car front wheels started to spin throwing traction control indicator on the dash.

    So afternoon I put the car on jack stands, unfortunately no rear wheel spin in first gear. So haldex is not working properly.
    VCDS scan shows no error codes related to the Haldex yet.

    Then I ran VCDS haldex (22 AWD Module ) output sequential test and Pre charge pump worked loudly at the pump on stage. Strange thing is if I ran this test back to back twice pre charge pump will not work in the second time. It only works if I recycle the power ( recycle the ignition) and rerun the test procedure through VCDS.

    So I suspect problem could be the haldex controller instead of pump. I am asking if anyone has a VCDS could test this back to back twice on their car ( with out recycling the car power) and post the result It could be great help for me to decide which part is the culprit.

    Also this test shows the current use by the pump and controller. First current reading seams to be related to the pump. If reading is zero pump is not working.
    Last edited by Ramee; 29-10-2013 at 11:32 PM.
    2013 Tiguan 155kW DSG | Leather | Bi Xenon's | Park Assist 2.0 | Panoramic Sunroof | RCD 510 | RVC | MDI
    Mods: APR K04 v3.1 | HPA Haldex | S3 Intercooler | Custom 3" Quad Tip Exhaust | Carbonio Intake | WL HD RSB | GFB DV+ | Koni Yellow Sport Struts & Eibach Springs | HP LCAs | Custom Audio ( Alpine MRX V70 , Audison Bit Ten , Dynamat , Stealth Sub ) | Car Tablet | CB Radio | Sports Pedals | RLine Door Sills | Wheel Arch Extensions | 3 Bar MAP & BKR8EIX | RT VCDS .... Performance: 0 - 100 km/h, 5.0 seconds ( Racelogic PBox tested ) Tiguan Build Thread

  2. #2
    Join Date
    Nov 2011
    Location
    Semaphore, SA
    Posts
    8,708
    I have to admit I know nothing about this, however my only suggestion is that the pressure in the lines may not have changed between tests and therefore the pump would not need to have activated in the second test (line was already at max pressure).

    Similar to when you pump the brake pedal. Second time it's rock hard.

    So I'd suggest finding a way to release the pressure in your lines between tests. Not sure how to do this - maybe drive forward and reverse a bit???

    As I said I'm no expert but it sounds like there's no need for the pump to activate a second time.

    2017 Tiguan Sportline - Tigger73's 162TSI Sportline

    2016 Scirocco R, stage 1, 205kwaw (sold) - Tigger73's Scirocco R Build
    2013 Tiguan 155TSI, stage 1, 144kwaw (sold) - Tigger73's 155TSI Build
    2011 Tiguan 125TSI, Stage 2+, 152kwaw (sold)
    - Tigger73's 125TSI Build



  3. #3
    Join Date
    Feb 2011
    Location
    Newcastle
    Posts
    6,070
    Users Country Flag

    Tiguan Haldex Malfunction .. VCDS test help !

    A guy with a Golf R had a very similar/same thing happen to his car a few months ago. Basically the Haldex pump shat itself making the car front wheel drive.

    A new Haldex unit was required. Here's the thread: http://www.vwgolf.net.au/showthread....c-Pump-Failure
    2017 Ford Fiesta ST the go kart

    2015 Audi SQ5 bi-turbo V6 TDI family hauler

  4. #4
    Join Date
    Apr 2007
    Location
    Adelaide hills, SA
    Posts
    9,708
    Users Country Flag
    Are you sure that you have the test procedure and conditions right?

    ..., make sure that if you've made any changes as I can see you could've tried something as per your other thread here Tiguan stability control defeat. , that they don't cause your fault.
    Last edited by Transporter; 30-10-2013 at 07:17 AM.

  5. #5
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,523
    Users Country Flag
    What condition are your tyres in?
    '07 Transporter 1.9 TDI
    '01 Beetle 2.0

  6. #6
    Join Date
    Jun 2013
    Location
    Australia
    Posts
    639
    Users Country Flag Thread Starter
    Quote Originally Posted by Umai Naa!! View Post
    What condition are your tyres in?
    Tyres are in good condition. Only 12k on them with good amount of thread on all of them.
    2013 Tiguan 155kW DSG | Leather | Bi Xenon's | Park Assist 2.0 | Panoramic Sunroof | RCD 510 | RVC | MDI
    Mods: APR K04 v3.1 | HPA Haldex | S3 Intercooler | Custom 3" Quad Tip Exhaust | Carbonio Intake | WL HD RSB | GFB DV+ | Koni Yellow Sport Struts & Eibach Springs | HP LCAs | Custom Audio ( Alpine MRX V70 , Audison Bit Ten , Dynamat , Stealth Sub ) | Car Tablet | CB Radio | Sports Pedals | RLine Door Sills | Wheel Arch Extensions | 3 Bar MAP & BKR8EIX | RT VCDS .... Performance: 0 - 100 km/h, 5.0 seconds ( Racelogic PBox tested ) Tiguan Build Thread

  7. #7
    Join Date
    Jun 2013
    Location
    Australia
    Posts
    639
    Users Country Flag Thread Starter
    Quote Originally Posted by tigger73 View Post
    I have to admit I know nothing about this, however my only suggestion is that the pressure in the lines may not have changed between tests and therefore the pump would not need to have activated in the second test (line was already at max pressure).

    Similar to when you pump the brake pedal. Second time it's rock hard.

    So I'd suggest finding a way to release the pressure in your lines between tests. Not sure how to do this - maybe drive forward and reverse a bit???

    As I said I'm no expert but it sounds like there's no need for the pump to activate a second time.
    This vcds test run in steps where you can switch on and off pump in different stages of test and can keep the pump running for long time. So it should be able to run the pump again in a next test cycle. I hope someone can test this twice and post the results. I am thinking pump drive circuit in haldex controller gone bad and need to.power cycle to get it working again.
    2013 Tiguan 155kW DSG | Leather | Bi Xenon's | Park Assist 2.0 | Panoramic Sunroof | RCD 510 | RVC | MDI
    Mods: APR K04 v3.1 | HPA Haldex | S3 Intercooler | Custom 3" Quad Tip Exhaust | Carbonio Intake | WL HD RSB | GFB DV+ | Koni Yellow Sport Struts & Eibach Springs | HP LCAs | Custom Audio ( Alpine MRX V70 , Audison Bit Ten , Dynamat , Stealth Sub ) | Car Tablet | CB Radio | Sports Pedals | RLine Door Sills | Wheel Arch Extensions | 3 Bar MAP & BKR8EIX | RT VCDS .... Performance: 0 - 100 km/h, 5.0 seconds ( Racelogic PBox tested ) Tiguan Build Thread

  8. #8
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,523
    Users Country Flag
    Quote Originally Posted by Ramee View Post
    Tyres are in good condition. Only 12k on them with good amount of thread on all of them.
    Cool, that's one of the fundamentals covered. Carry on.
    '07 Transporter 1.9 TDI
    '01 Beetle 2.0

  9. #9
    Join Date
    Jun 2013
    Location
    Australia
    Posts
    639
    Users Country Flag Thread Starter
    Quote Originally Posted by Transporter View Post
    Are you sure that you have the test procedure and conditions right?

    ..., make sure that if you've made any changes as I can see you could've tried something as per your other thread here Tiguan stability control defeat. , that they don't cause your fault.
    Is their any special precautions I have to follow doing this test?
    Oh I haven't done any vcds craziness to disable stability control
    2013 Tiguan 155kW DSG | Leather | Bi Xenon's | Park Assist 2.0 | Panoramic Sunroof | RCD 510 | RVC | MDI
    Mods: APR K04 v3.1 | HPA Haldex | S3 Intercooler | Custom 3" Quad Tip Exhaust | Carbonio Intake | WL HD RSB | GFB DV+ | Koni Yellow Sport Struts & Eibach Springs | HP LCAs | Custom Audio ( Alpine MRX V70 , Audison Bit Ten , Dynamat , Stealth Sub ) | Car Tablet | CB Radio | Sports Pedals | RLine Door Sills | Wheel Arch Extensions | 3 Bar MAP & BKR8EIX | RT VCDS .... Performance: 0 - 100 km/h, 5.0 seconds ( Racelogic PBox tested ) Tiguan Build Thread

  10. #10
    Join Date
    Jun 2013
    Location
    Australia
    Posts
    639
    Users Country Flag Thread Starter

    Quote Originally Posted by Lucas_R View Post
    A guy with a Golf R had a very similar/same thing happen to his car a few months ago. Basically the Haldex pump shat itself making the car front wheel drive.

    A new Haldex unit was required. Here's the thread: Haldex Hydraulic Pump Failure
    Yep. Same story... Now I hate front wheel drive Tigs. with 270 hp..
    2013 Tiguan 155kW DSG | Leather | Bi Xenon's | Park Assist 2.0 | Panoramic Sunroof | RCD 510 | RVC | MDI
    Mods: APR K04 v3.1 | HPA Haldex | S3 Intercooler | Custom 3" Quad Tip Exhaust | Carbonio Intake | WL HD RSB | GFB DV+ | Koni Yellow Sport Struts & Eibach Springs | HP LCAs | Custom Audio ( Alpine MRX V70 , Audison Bit Ten , Dynamat , Stealth Sub ) | Car Tablet | CB Radio | Sports Pedals | RLine Door Sills | Wheel Arch Extensions | 3 Bar MAP & BKR8EIX | RT VCDS .... Performance: 0 - 100 km/h, 5.0 seconds ( Racelogic PBox tested ) Tiguan Build Thread

Page 1 of 4 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |