Results 1 to 7 of 7

Thread: Programming problems

  1. #1
    Join Date
    Dec 2011
    Location
    Pacific Paradise QLD
    Posts
    7,395
    Users Country Flag

    Programming problems

    Have a lend of a cable and am trying to do the following

    A enable Auto mirror retract as per the thread on VWVortex.

    B alter speedo pulses to get it more accurate

    C enable easy access on power seat.

    Have found the correct places and changed the values but nothing changes.

    Followed the instructions and checked that the values have retained after exiting from the page it was done on.

    What am I doing wrong.

    In B above was set on 3 and rest of world I changed it to Aus and 7 No change.

    In C i ticked the box and changed value to 1 No change

    In A followed what it says in the thread and neither value works

    VWVortex.com - Passat CC auto folding side mirrors DIY tutorial (nice coding feature)
    2021 Kamiq LE 110 , Moon White, BV cameras F & B
    Mamba Ebike to replace Tiguan

  2. #2
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,981
    Users Country Flag
    Quote Originally Posted by Hillbilly View Post
    Have a lend of a cable and am trying to do the following

    A enable Auto mirror retract as per the thread on VWVortex.

    B alter speedo pulses to get it more accurate

    C enable easy access on power seat.

    Have found the correct places and changed the values but nothing changes.

    Followed the instructions and checked that the values have retained after exiting from the page it was done on.

    What am I doing wrong.

    In B above was set on 3 and rest of world I changed it to Aus and 7 No change.

    In C i ticked the box and changed value to 1 No change

    In A followed what it says in the thread and neither value works

    VWVortex.com - Passat CC auto folding side mirrors DIY tutorial (nice coding feature)

    Is whatever you are coding the same part as the one on vortex?

  3. #3
    Join Date
    Dec 2011
    Location
    Pacific Paradise QLD
    Posts
    7,395
    Users Country Flag Thread Starter
    Quote Originally Posted by h100vw View Post
    Is whatever you are coding the same part as the one on vortex?
    I think so will check in the morning It accepts it all and the original number was correct for the Byte
    2021 Kamiq LE 110 , Moon White, BV cameras F & B
    Mamba Ebike to replace Tiguan

  4. #4
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,081
    Users Country Flag
    B7 platform has a BCM (body control module), which is combined CECM (central electrics module) and CCM (comfort/convenience module).
    In VCDS shows up as 2 different addresses so looks the same as a B6.
    Have found most tweaks that work on earlier platforms don't on the B7 eg rain closing despite the fact that coding appears to be similar.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  5. #5
    Join Date
    Dec 2011
    Location
    Pacific Paradise QLD
    Posts
    7,395
    Users Country Flag Thread Starter
    So what is the solution I thought the B7 was really only a B 6.5 sort of

    Have tried 3 times to alter the speedo but nothing works It tells me I am in the right place but the changes dont register
    2021 Kamiq LE 110 , Moon White, BV cameras F & B
    Mamba Ebike to replace Tiguan

  6. #6
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,081
    Users Country Flag
    I wish I knew. Seems like they kinda locked down a lot of these tweaks.

    Sent from my HTC One M8 using Tapatalk
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  7. #7
    Join Date
    Dec 2011
    Location
    Pacific Paradise QLD
    Posts
    7,395
    Users Country Flag Thread Starter

    Ok have enabled Ease of access on the drivers seat and changed the number of indicator flashes on lane change.

    Unable to change speedo even though it accepts the code change and same with folding mirror.

    Cleared some error codes about low battery and an engine management, MAF sensor error Discon when service done??

    Did another scan and no errors ???????
    Last edited by Hillbilly; 29-07-2015 at 01:04 PM.
    2021 Kamiq LE 110 , Moon White, BV cameras F & B
    Mamba Ebike to replace Tiguan

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |