Last 2 errors - can someone help me

[remigi]

Hi Guys

I have upgraded my CAN Gateway for my RCD510 install and I have two errors that I cannot get rid of, maybe someone can help?

Wednesday,31,July,2013,20:08:55:60875
VCDS Version: Release 11.11.6 (x64)

Address 46: Central Conv. Labels: 1K0-959-433-MIN.clb
Control Module Part Number: 1K0 959 433 BL
Component and/or Version: 01 KSG 0301
Software Coding: 91C802087F2D8505485FC69010
Work Shop Code: WSC 50620 812 60948
Additional Info: 1K0951605C LIN BACKUP HORN H03 1301 1K0907719B Neigungssensor 004 0003
Additional Info: 1K0951177 Innenraumueberw.004 0101
VCID: 7BDB2A1C3A08ABC0759
1 Fault Found:

01134 - Alarm Horn (H12)
004 - No Signal/Communication

--------------------------------


Wednesday,31,July,2013,20:06:24:60875
VCDS Version: Release 11.11.6 (x64)

Address 61: Battery Regul. Labels: 1K0-907-534.clb
Control Module Part Number: 7N0 907 534 HW: 7N0 907 530 G
Component and/or Version: Batt.regelung H41 1632
Software Coding: F000185A
Work Shop Code: WSC 12345 123 12345
VCID: F1C78834284451905F5
1 Fault Found:

02071 - Local Databus
012 - Electrical Fault in Circuit
Freeze Frame:
Fault Status: 01101100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 0
Mileage: 71621 km
Time Indication: 0
Date: 2000.00.00
Time: 20:59:03

[Transporter]

Where are the car details? Model? Year?

If you don't have the back up horn and the stop start system, then you can just disregard these faults.

[Umai Naa!!]

Like I said the other day, either code them out, or ignore them.

The codes basically translate to not being able to communicate with control modules that aren't fitted.