Support VWWC

Results 1 to 5 of 5

Thread: Number Plate bracket for Fabia

  1. #1
    Join Date
    Jan 2010
    Location
    Sunshine Coast
    Posts
    81

    Number Plate bracket for Fabia

    Hey Guys,
    I've just received the remake of my number plates in regular and slimline for my Fabia Monte Carlo but I don't want to drill new holes in the plates to fit them.
    Is there a bracket designed for the Fabia's Euro plate holes that I can use to then attach my plates to? I want something without a surround bracket so it's not noticeable that an adaptor bracket is there.

    Your help you would be hugely appreciated.

    Cheers,
    Ash
    1963 Single Cab Ute: "El Concreto"
    1955 Splitscreen Bus: "Nanna"
    1960 LWB J&S Buggy: "Oihiki"
    2012 Skoda Fabia Monte Carlo: "Biscuit"

  2. #2
    I have not found any for our two Fabia's but luckily the holes lined up and you cannot really see the screws on both cars with Euro plates.

    Skoda Fabia II RS, OZ Racing Superturismo GT, APR, VW Racing, HP Polo 6R F/R arb's, DSG Tune, EBC Yellows, Motul, KW V3

  3. #3
    Join Date
    Jan 2010
    Location
    Sunshine Coast
    Posts
    81
    Thread Starter
    As mentioned i do not have Euro plates, and did not want them due to the fact my plate design didnt look right on the Euro plates.

    Had a look on the Lakin webstie, but the prices were rediculous. Think we might make some up ourselves.
    1963 Single Cab Ute: "El Concreto"
    1955 Splitscreen Bus: "Nanna"
    1960 LWB J&S Buggy: "Oihiki"
    2012 Skoda Fabia Monte Carlo: "Biscuit"

  4. #4
    Join Date
    May 2008
    Location
    Erskineville, NSW
    Posts
    7,591
    Users Country Flag
    Double sided tape = no drilling necessary
    carandimage The place where Off-Topic is On-Topic
    I used to think I was anal-retentive until I started getting involved in car forums

  5. #5
    Join Date
    Aug 2012
    Location
    Geelong, Victoria
    Posts
    236
    Users Country Flag

    Make some... ??? Flat plate alloy, clipnuts or rivnuts, two spacers and a bit of time but they will sit away from bumper a little regardless.

    I have them on my Grey Import Skyline and was going to do the same with Fabia. Was going to put on some covers too because it looks nice but it is just not really worth it. Just couldn't be bothered especially as the standard Vic Plate is awful regardless.

    The Self Tapper install set-up is a disgrace though. May add some Riv Nuts at some point to add a metal thread.
    Owner and Operator of 2013 Polo GTI - Sunroof - Xenons - Reflex Silver
    APR Stage 2 Tune - HP Carbon Airbox - Jetex Stainless Cat Back Exhaust - APR I/C
    Plus a few other bits and pieces.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |